Recent content by copex

simply remove the gateway for all of the cameras and they will only talk to devices on the same subnet :-)

my monitor psu failed so i did't get the monitor connected to the NVR, done some setup via the web browser, i know i can check a box and browse to each camera, ( we supply a different NVR, its all plug and play, everything gets synced. ) but thanks for your input :)

hi is there anyway to sync the IP cameras time with out having to login to the camera? thanks

Yes but you only have to do the gateway, if a IP is outside of the subnet it is sent to the gateway, if the gateway is invalid the trafic will not be routed and just dropped, (so you could set the gateway to the BI server if the device dose not like been 0.0.0.0 & Bi has not been setup to do...

probably easier if you read the manual :) i would normally add the cameras in the order required, you could edit the camera's IPs by logging in to each camera :) from the user manual

uniview unv

google "hikvision portal"

Hi you can lock files, see below from univew nvr user guide, i use this feature with the clipping function, just rember to backup to usb or unlock the file to freeup the disk spce Lock files. Use this function to lock a recording file so it will not be overwritten. Click for the recording...

normally on a change of direction or 15 to 20 metters

the conduit should be installed with inspection joints and a draw wire/rope and have slow bends ( no 90 degrees ) depending on the size of conduit and number of cables, you can connect a few cables to the draw and the stagger the rest of the cables, then pull the to first inspection point, then...

ill just chuck this in reverse ssh tunnelling see link below ;-) reverse ssh tunneling - Google Search

the resistor is only required when not connecting a chime, you should be able to remove it.

mine is wired the same, wired across 1 & 2 on the left, i get one ding when i power on and every time the button is pressed what happens when you put voltage across 1&2 on the bell directly? you should get a ding when applied and dong when removed also check the voltage with a multimeter?

no the chime is in line on the return from the door bell, no buzz it just works

i'm running this version without issue, i upgraded using the web portal DOWNLOAD EU PORTAL