Cooltiger's latest activity
-
CIf you want to get some more performance from your Nvidia GPU change the below setting to Prefer maximum performance
-
CFinally my low-powered /low profile / single slot AMD Radeon RX6400 GPU arrived after a month of waiting and I was able to move Blue...
-
CCooltiger reacted to wittaj's post in the thread Screenshots- Amcrest 4k (2.8 lens) vs Empiretech 4MP (2.8-12 lens) with
Like.
Now you have experienced why we stress the importance of chasing sensor size and focal length over MP, and why I created this post... -
CBelow are the recommended settings.
-
CKen did reply to my earlier message and it appears there was a change in BlueIris that changed the behavior for me to what it should...
-
CYou might want to try rolling back to 5.8.7.11 and see if that helps.
-
CHow about you remove the cutom models from the folder you don't need. I've always done that. That should work, correct?
-
CAs many of us have experienced, and well documented in this thread, that the 3M printed plates, especially those with blue in them, are...
-
CCooltiger reacted to wittaj's post in the thread Am I missing something? (Motion Detection) with Like.
And being the pro he is, I bet he left everything on auto/default settings? Tell him you want cameras on the ideal MP/Sensor ratio...
-
CCooltiger reacted to luk8899's post in the thread Is ZoneMinder still being actively developed? with Like.
Hi, I've been using zoneminder with AI detection for years so I can comment on few things here. Regarding GPUs I recommend nVidia for...
-
CAs others have said, pulling more cables than you think you'll need is the ideal situation. Failing that, I've been using a couple of...
-
CCooltiger reacted to guykuo's post in the thread Comparison pict SD49225T-HN vs Loryta PTZ5A4M-25X with Like.
Had to be painted to pass wife and HOA muster.
-
CAnd even with the advancements, it still isn't enough to deviate from this ideal MP/sensor size ratio:
-
CCooltiger replied to the thread CodeProject.AI Version 2.5.My BI on 5.8.8.2 also reverted to Auto and not delayed start. My BI on 5.8.7.11 also had reset to Auto not delayed start.