Recent content by ChirpyTurnip

  1. C

    Firmware for IPC-T54IR-ZE question

    I have received some older firmware versions from Andy! Testing now, but it seems that V3.142.15OG003.0.R.241221.bin is a better fit....have flashed this on, configured cameras, tried multiple reboots and it is looking solid the way it should be - so two cameras are back online! :-)
  2. C

    Firmware for IPC-T54IR-ZE question

    I have this installed on two units: Device Model: IPC-T54IR-ZE-S3 Audio Input: 1 ONVIF Version: 24.12(V3.1.0.2288909) System Version: V3.142.0000000.8.R, Build Date: 2025-08-26 Web Version: V5.01.0.2308726 Algorithm Version: V5.07.25.0 Security Baseline Version: V2.4 H5Player Version: V3.01.1...
  3. C

    MQTT Publish Errors....

    I'm still getting bombarded with MQTT publish errors....20-30 emails a day....is there nothing I can do to at least diagnose the problem? Everything seems to work and yet it insists on spewing forth error messages.... :-(
  4. C

    MQTT Publish Errors....

    Hmmm....I'm not so sure.....on my end I'm using Mosquitto Broker on Home Assistant (mosquitto.conf man page) and there's little reference to buffers there...and most of the limits for everything else seem pretty generous. When I'm testing it all seems to work. From the HA end I get: 2023-09-06...
  5. C

    Motion Detection + AI - What's the secret to stop alerts when recognised objects are outside zones?

    Been home. Had a play, mounted another camera. One to go. It seems to me that the BI AI will only work if triggered by motion zones....is that right? It's definitely not working for me at present and to get my MQTT / emails working I needed to remove all the "required object" settings from...
  6. C

    Motion Detection + AI - What's the secret to stop alerts when recognised objects are outside zones?

    OK. I have set turned off everything in the cameras except the IVS/AI bits (so no video motion detection etc - just intrusion zone) and I've told BI to trigger only on ONVIF (so no motion zones). Running ProjectCode.AI for the BI smart detections....should that have any/no zones checked or is...
  7. C

    Motion Detection + AI - What's the secret to stop alerts when recognised objects are outside zones?

    And then trigger only on ONVIF?
  8. C

    Motion Detection + AI - What's the secret to stop alerts when recognised objects are outside zones?

    Hi, Just fishing.....I'm at work so have no access to home BI system, but thought I'd get a question in already to get the ball rolling. Long story short: Have a camera (obviously) Field of view split into three 'space separated' zones as follows: A - neighbor's property next to my driveway...
  9. C

    MQTT Publish Errors....

    Hi, I've been steadily chipping away at getting BI working with some new cameras that I've bought off EmpireTechAndy but I've got a few teething problems with BI - I'm to going to post here for some help....hopefully someone can point me in the right direction to start squashing these bugs in...
See more
Top Bottom