Recent content by cdfr

  1. C

    Bricked my DS-2CD6412FWD-30 firmware 5.3.5 and discovered it is a chinese unit

    So tried R1, R3, R6 changed to CN language and got this in a loop.
  2. C

    Bricked my DS-2CD6412FWD-30 firmware 5.3.5 and discovered it is a chinese unit

    Thanks for the links. I had not noticed them before. Can I use the Hikvision tftp tool ? I did read somewhere another was suggested. Thanks !
  3. C

    Bricked my DS-2CD6412FWD-30 firmware 5.3.5 and discovered it is a chinese unit

    Reset resulted in the camera to not be visible in SADP anymore and I noticed it went from 192.168.1.64 to 192.0.0.64. So if I got it right I should get an R1 and R3 firmware (presumably from the US hikvision site as I could not find these elsewere), Switch their headers to CN and try them via...
  4. C

    Bricked my DS-2CD6412FWD-30 firmware 5.3.5 and discovered it is a chinese unit

    No unfortunately it did not say "Firmware update successful". I thought this may work as this camera starts with DS-2CD6 Is it worth trying with the DS-2CD6412FWD-C2 firmware instead ? Is there a way a modified TFTP boot could display the expected firmware so at least I would know what version...
  5. C

    Bricked my DS-2CD6412FWD-30 firmware 5.3.5 and discovered it is a chinese unit

    Hello, I lost my password and thought I could quickly fix this by doing the reset on the camera. But then the camera did dot come up on its regular address. What a mistake ! I ran wireshark to find out it was on 192.0.0.64 and looking for a tftp server on 192.0.0.128 A few minutes after I...
See more
Top Bottom