Recent content by casperd

  1. C

    Dahua camera not responding after reset

    I have several of these cameras, IE & Edge are very bad, crome is challanging, only Firefox works. This is NOT a browser issue, I can validate all settings with Telnet as well.
  2. C

    Dahua camera not responding after reset

    Camera was operational for a short period (on a undesired IP address). After a power cycle camera is bricked again :'(
  3. C

    Dahua camera not responding after reset

    On the FW revission of the camera, only Firefox works. Some keyboard interpetaion error in crome (deletes tha char after entering) Who are using IE -- odd question ;-) It looks like certain subnets bricks the camera, all though the camera was on this subnet prior to factory reset.
  4. C

    Dahua camera not responding after reset

    Some progress, but not done. If i prolongen the reset procedure (shorting the pins for a minute), the camera wakes up with GUI active, I can log in++, and access from config tool. But as soon as I change the IP address, the camera disapears, not discoverable by the config tool, not to be found...
  5. C

    Dahua camera not responding after reset

    If it was that easy, I wouldn't need to ask the forum ;-) No ports are open on the device, not 80 and not 37777, or any other port I have scanned.
  6. C

    Dahua camera not responding after reset

    Hi I have performed a HW reset on two Dahua cameras (opening the camera, shorting the reset pins on the board). DH-IPC-HFW4300S-V2-0600B DH-IPC-HFW4300R-Z After reset both cameras are discoverable on the factory IP 192.168.1.108, but no ports are open. The Dahua config tool cannot find the...
See more
Top Bottom