cam-da's latest activity
-
Ccam-da posted the thread Dahua NVR - Can I receive IVS Push Notifications on DMSS app via public IP and open inbound ports with P2P Disabled? in NVR's, DVR's & Computers.Hello, I have a basic question about your Dahua XVR and NVR devices. My recorder is in a location that has a static fixed public IP...
-
Ccam-da replied to the thread Dahua NVR no push notifications in DMSS on Apple iOS with active subscription for SMD rules and IVS rules.thanks for the infos
-
Ccam-da reacted to IPCamer's post in the thread Dahua NVR no push notifications in DMSS on Apple iOS with active subscription for SMD rules and IVS rules with
Like.
@cam-da Yes , it is still port 8888, see below , 2 events triggered one on Android (port 443) and the other on IOS (port 8888). These... -
Ccam-da replied to the thread Dahua NVR no push notifications in DMSS on Apple iOS with active subscription for SMD rules and IVS rules.@IPCamer Thank you. An additional info: I changed my ports: TCP 39001 (instead of 37777) TCP 39002 (instead of 443) TCP 39003 (instead...
-
Ccam-da posted the thread Dahua NVR no push notifications in DMSS on Apple iOS with active subscription for SMD rules and IVS rules in NVR's, DVR's & Computers.Hello together, I currently have the following problem. I am currently setting up new Apple iOS DMSS apps including the IVS and SMD...
-
-
Ccam-da replied to the thread Ethernet-over-Coax(EoC).I am not familiar with the PFT1300 PoE component. I will have a look at it. My problem is still that I don't know how much current /...
-
Ccam-da replied to the thread Ethernet-over-Coax(EoC).Unfortunately not. The existing coaxial cable (100ft) is a normal RG-59 cable with BNC connectors (without additional cable). I don't...
-
CI used to run two cameras that way with 200 ft of coax in the middle
-
CYes it will work. I have 4 cameras on a POE switch doing just that with the coax in the middle. Mine is about 100 feet.
-
Ccam-da replied to the thread Ethernet-over-Coax(EoC).Hello @wittaj, hello @bigredfish, I may have made a mistake in my project. In my case, the switch would be located on the outside (in...
-
-
Ccam-da replied to the thread Ethernet-over-Coax(EoC).Thank you for your good news. I haven't done anything with EoC yet. This saves me a lot of work now.
-
CHello, I have the following question: I have a 40m long RG59 coaxial cable already installed and I would like to know if it is...
