Recent content by CAL7

Isn't this a problem?

My under-powered 2GB P400 does much better on 6.2 than .NET, roughly 300ms vs 1400.

A quick update. None of the unistall/re-install processes worked with v2.0.8, but 2.1.1 installed beautifully. I have to figure out my model configuration and detection parameters because I get "Nothing Found" but I know CP.AI is being sent the images to analyze. Close!

Is upgrading from 11.7 to 12 required?

That report looks identical to my issue. Thanks so much for the tip. I'm away from my BI/CPAI machine tonight but will investigate Saturday. Thanks again. UPDATE: My symptoms were the same but the solution offered {deleteing the PROGRAMDATA json} does not work for me. In fact, I don't even...

Thanks @kaltertod and @MikeLud1 But, still no joy. All the uninstalls and re-installs seems to go perfectly and the Program Files/CodeProject directory is created again. But it never runs. I see no sign of CPAI in Device Manager or in the Services list. In the Blue Iris AI screen the...

My CPAI seems to be dead in the water and I don't know why. It's been installed and running very successfully for several months. The environment is Windows 10, BI 5.7.4.2 and CPAI 2.0.8.0. Starting 2 days ago, CPAI didn't respond and today when I pulled up localhost:32168, it did not respond...

Are there SSD's that are rated for 24/7 use?

Same here.

Thanks, @MikeLud1 From the chart, the 5m seems to give the best performance boost with a low marginal increased hit to resources. ChatGPT suggests 5n would be near the 5m performance, but I don't see that opinion validated by the chart.

To clarify my own use, I use the direct method to the cameras by issuing http commands from my home automaton (Hubitat) system. This allows me to tweak the exact times, relative to sunrise and sunset, for each camera. E.g. the camera on my east side does better in day/color mode a few minutes...

I had to start using this when a couple of my cameras started going berserk auto-switching back and forth at dawn.

Is v2.0 any less supported than what we are using now with v1.6.8?

Thank you, gents. Here is what I am using for the Profile. I don't want to use fixed times forever, but for testing I thought it best to use a time schedule so I know there is no automation getting in the way. For Exposure, I am setting everything to manual for the same reason as above...

Sorry to say that this camera is still struggling. Here are its current settings: And a snippet of 67 seconds of video with four dropouts. Any and all ideas are welcome.