Hi.
Hoping someone can give some input regarding an issue I have with a customer.
They have a DVR unit and use the AlienDVR app to access the cameras. Historically access has been permitted via port forwarding and access both internal and external works via Dynamic DNS.
Customer has recently...
Hi Again.
I have managed to make some progress - I found that there is a menu to control the camera directly by calling a preset. I did that and was able to navigate to an IT Display setting. From here I saw working mode and could choose Auto, Off or On.
Setting to Off disabled the IR and...
Hi,
For light mode we have:
Pure infrared light
Pure white light
Open white light when infrared triggered
Open infrared light when white triggered
For LED image option we have:
Normal
Prevent overexposure fave
Lincense plate then modes 1-6
For LED Brightness we have:
Auto
Manual
Brightness...
Thanks for the information, I was not aware that in the lower end models they use a light sensor to control the day/night signal. Is there no way to override this if that is indeed how this camera is set up ?
I will have to investigate the camera further and test via the light sensor. If it...
Thanks for the reply - yeh understandable but there is an option for IRCut Mode and I can select Manual. This then gives me 2 buttons, Day Mode and Night Mode. When I select Day Mode the image will flicker as if it is going into day mode but then flicks back. It happily switches between...
Hi All.
Hoping someone can help - I have recently set up a PTZ Dome Camera - a cheap model from eBay just for testing. I believe it is the same as per this listing...