Recent content by BPet

I am having the same issue. How did you fix this? Thanks in advance for any help you can provide! :)

It's a Dahua IPC-HFW5231E-Z12, it's 7 years old and so I don't think it has AI. I was considering CodeProject, but then I have to get a new PC because my processor is too old. After I removed the Zone H, it seems to be working very well. Thanks for your comments!

Thanks for the suggestion. I will look into that too. My issue is that I’m trying to catch cars, but also people walking and so it’s a bit tricky. Thx again!

Duh, don't know why I never read that before. That makes perfect sense as to why I'm getting these "Motion H" triggers. Thank you so much!

Just had another trigger, an Amazon driver pulls up and Blue Iris catches him crossing many zones and triggers appropriately with ABCDH. Then, the driver gets out of the car and is definitely only in zone H and Blue Iris triggers again with "Motion H". It is not a big deal this time because...

Often Blue Iris indicates that a single zone causes the motion trigger. It will sometimes show something like "Motion ABC", which is how I intend it to work, but other times it will shows simply "Motion H". Based on how I set up Object Crosses Zones, I intend it to only trigger if an object...

I have some home automation software run this twice a day, which is the only time mine loses focus.

I emailed Ken and he confirmed that the Object Size Exceeds percentage refers to the "Total Image Size", not just the active pixels. Hope this helps someone in the future :)

As I'm playing around with it more, I think my issue had to do with profiles. I have my profiles set for each camera from commands sent to Blue Iris from an outside program...seems like when using Test Run Through Motion Detector, it is running through my Profile #1 - Blue Iris's default...

giel - thanks for the reply. Have you used the feature and if so, do you use it with a clip from a previous alert or do you use footage from 'continuous' recording? Trying to figure out why it's not working for me :)

Can anyone tell me what I am doing wrong? I get a clip generated by sun/shadows activating the motion detector on a cam. I have the rectangles turned on and so I see the location in the image where the motion is taking place. I replay the clip, and select "Test Run Video Through Motion...

Duh, thank you sooo much!! I have been using the App for years and I guess I have just gone blind to what was staring me in the face :) It works perfectly!!

I have two of my cams set to Continuous Record and also motion trigger. Many times, the cam does not get triggered because of the balancing act that I have to play between too many triggers and no triggers :) I can easily view the triggered clips in the App. Is there anyway to view the...

Anybody ever hear back definitively from Ken on whether this refers to the 'frame' or the total of the zones? I think that Blue Iris ignores areas that are not in Zones and so if you don't create a large mask zone - then I'm thinking that it is only going to take into an account the pixel...

Thanks for the reply fenderman :) I tried a global schedule override, but that did not work. Could it be because I don't use a global schedule, but rather select the global profile via a http command? I would use the global schedule, but I don't think there is a way to select the profile...