bp2008's latest activity
-
bp2008 replied to the thread Blue Iris UI3.Well @erkme73 your live streams (of single cameras only) are using direct-to-wire so the video is coming from an entirely different... -
bp2008 replied to the thread Blue Iris UI3.Please try UI3-320 from here: Releases · bp2008/ui3 I've added that new frame rendered detection method. Please let me know if the...
-
bp2008 replied to the thread Blue Iris UI3.Ok I just made sure my Edge and Chrome are both fully updated and neither has this issue yet. Tried on two physical machines with...
-
bp2008 replied to the thread Blue Iris UI3.The videos so far have told me it probably is not i-frame related because it breaks after a different number of frames each time. I...
-
-
First off, thanks for the explanation Bp2008. Done for today, but i did find that Chrome is doing the same thing Edge is doing. For...
-
bp2008 replied to the thread Blue Iris UI3.Ok so this is a tricky issue with a long history. Years and years ago (surely 5+ years) I would have the video randomly freeze when...
-
bp2008 replied to the thread Blue Iris UI3.It is less efficient. And technically more dated. You are correct on both points. Trouble is I have no way of knowing what is causing...
-
@bp2008: I sometimes try to scrub through a whole night's recordings quickly in the console, but because I have recordings broken into a...
-
bp2008 replied to the thread Blue Iris UI3.@erkme73 Try a different H.264 player in UI Settings. Looks like the HTML5 player is just stalling.
-
bp2008 replied to the thread BI behing nginx and proxy_pass problem 502 Bad Gateway.I've run every version in the 6.0.4.x series so far and had no trouble. I also use nginx for a reverse proxy currently. This probably...
-
bp2008 replied to the thread UI3 Fail Getting Camera List, Busy Loading Timeline Loop.. Repeats..Try BiUpdateHelper which has a button you can click to read the license key from the registry (after you've imported from your .reg...
-
bp2008 replied to the thread Blue Iris UI3.That camera group is most likely configured to be a fixed aspect ratio in Blue Iris, which disables UI3's ability to demand its own...
-
bp2008 replied to the thread Blue Iris UI3.Indeed, all I'd know how to do is what you are already trying. When you've created your fake narrow/tall cameras, go into Blue Iris's...
-
-
Yes, shows ONVIF Version 21.06(V2.0.1.61051). And there was a check mark for it. And it was checked. you've been here for a while :)...
-
bp2008 replied to the thread What is causing this issue?.That is not necessarily true. TCP guarantees delivery of data packets in the correct order and with no packets missing or corrupted...
-
bp2008 reacted to iwanttosee's post in the thread RTSP steam not working in BI but works fine in VLC and Home Assistant. with
Like.
Here is what I found. Bullet Mini LE, Dome Mini LE, and Eye Mini LE all uses the same firmware. These Companion cameras don't have a... -
Regarding the H4C and ONVIF, I stumbled across this below. The H4C is also known as the "Hero C1". Insure your camera has updated...
-
Thanks the cameras work with "Use RTP/UDP ports" so I will try that to see if it improves.
-
bp2008 replied to the thread H4C blue iris P and T setting.I assume you are talking about: https://empiretech01.com/products/empiretech-h4c-4mp-indoor-fixed-focal-wi-fi-network-pt-camera or H4C -...
-
-
bp2008 replied to the thread What is causing this issue?.Many years ago I used to have a problem just like that with a Chinese camera that was corrupting its own video stream due to buggy...
