Recent content by BillRitz

But in my attachments the SADP tool from Annke shows .167, and I set the address in BI to .167, so what am I doing wrong?

I've had BI up for a couple of years now with 15 h.264 and h.265 cameras, and I bought an Annke 5MP to replace one of the older h.264 models. I ran their SADP software network camera discovery tool and it said the camera was set to port 192.168.0.167 (attachment #1). I don't think I have...

Thanks guys. I'll try these.

You guessed it - I don't know how to do that. I got 15 cameras working some years ago, and last year I got them all up under BlueIris, but not with a browser. for example, one of my cameras is at 192.168.9.114, but if I put it in a browser I get this: If I click on the Here link, it tries to...

On the case it has Model I51DL

Thanks. I'll feed those two to BI find/inspect with a few passwords like admin,12345, 123456, and password, and see if I get anything.

I bought an Annke refurbed 5MP camera, but it came with no documentation or software, and BlueIris' Find/Inspect doesn't see it (I've actually never had find/inspect work without putting the address in the top; it inspects, but can't find <grin>). I'm assuming in the refurb process they reset...

Mine is a 16 port Yuanley POE switch. I wanted one reasonable priced and rack mountable, and I think I found it on Amazon for about $129. No problems with it after 6 months.

Porkrind74: at the top of the post you say it hesitates "both with live view and recordings" but in the last line you say "the direct streams look totally fine." What is the difference between "live view" and "direct streams"? As I said above, when I export to MP3 and playback that, there's no...

Did anyone come up with a solution to this? The fact that an MP3 export of the video plays with no hesitation means that the material is making it to the .bvr file, and eliminates anything before the file's created: cameras, compression, network, etc. and that means the problem lies in how BI...

bp2008: This is happening in the main Blue Iris program, not with remote access. I thought i-frame was the multiple for sending stuff out to the web; am I wrong about that and it can affect playback of clips in the main program? Flavacali: (BTW, your cat looks a lot like ours) When I loaded my...

Thanks guys. I'll try all your suggestions over the weekend and let you know.

I rebooted and this started, so it's something I've changed in the last week or so that needed the reboot to activate. It happens on replay of clips at main stream resolution, and I don't think it's related to CPU because my CPU runs only about 9%-14%, and I use about 1.2 GB RAM of 8. If I...

This turned out to be much easier than I thought. Hitting the Configure button on the Video tab, below where the camera selection says the make is "Generic/ONVIF" and the model is "*RTSP H.264/H.265/MJPG/MPEG4" the Main Stream says "/profile1" I thought: this couldn't be that easy, after I've...

I don't have the main stream string; after trying all of the Sony cameras listed in Blue Iris with no success, I loaded them all as ONVIF. The software they came with (NVMS-1000) lets me see 3 streams per camera, and even edit them; I can change the resolution and FPS of the streams, VBR or CBR...