Recent content by atom

Maybe, I dont have a recent Dahua set up to check atm (we're moving house). Is there an option for H264, rather than H264H?

Edit: I see your screenshot shows the encoding. Maybe try H264 if possible. I've had similar problems with different encoding.

The top/mounting surface. For mine mounted outside, I fill all of the gaps with silicone just in case.

The plugin was in relation to the watched items only being notified of one post until the user visits the thread again Mike. If they've fixed that too then cool :)

Hey Mike. The site's looking and running great, thanks for all your hard work! Regarding the email notifications above, I've used this add-on in the past and it's worked well, although from memory it can be a bit tedious to setup at first. [bd] Forum Watch for XenForo 1.2+

In the last BI update Ken included some changes to the way these frame rate variations are handled, and he suggested enabling "Use RTSP/stream timecode" (under Camera properties -> Video -> Configure) if it's not already. Might be worth a try.

No, it works fine. The only minor issue is that the diagonal arrows/movement don't work (at least with the settings I'm using), but horizontal and vertical are fine. Presets are all good too.

You should only need to set each preset in the browser, then they will just work in BI without having to do the BI part of your process above.

When I try to set a preset in my V2 in BI the cam restarts itself and the preset fails to take. Everything else works OK, so I just set the presets via the browser interface.

That's the same as my most recently purchased one, and newer PTZ Version than my older ones, so it may be the most recent firmware. Eitheir way they all work fine for me so I wouldn't risk an update.

I have 3 V1s survive summer here in Australia, and one of them is painted matte black and is in the the sun all day. Hopefully any failures due to heat are the exception rather than the norm.

It's much better than .2 for me. With "use rtsp/stream timecode" selected for each cam the choppiness is mostly solved (unlike in .2 even with this selected). Exporting clips (I only tried MP4) seems fine too.

I had a V1 that used to do exactly this, and when I powered it with a 12v supply instead of PoE it came good. In my case the issue was cruddy old cat 5 cable.

Ken has replied saying there is a fix coming in 4.3.9.3 which should smooth out these issues.

Check to see if the frame rate for each cam is the same in BI as it is set in the camera. The auto-framerate adjustment in BI is causing choppiness in my case.