Try adding no_root_squash to the options. I found this, where it says to do an all_squash, but try no_root_squash first. About NFS (Network File System) - openmediavault
Hikvision firmware runs as "root" - root is usually denied write permissions on NFS unless it is told to allow it.
My...
According to what I see in your pics, it should just be /Inspelningar - but it can't hurt to try the entire path.
That Open Media Vauilt should be Linux, and can you get to a command prompt? If so, type this command:
showmount -e localhost
You should see a list of filesystems that are...
If the camera's IP is 192.168.1.64, the client IP in the NFS config should 192.168.1.64/32 (or just leave off the /32 altogether) - /24 should work, but who knows if that confuses the NFS server. /24 means 192.168.1.xx can connect. When you specify /24, it should be 192.168.1.0/24 - that extra...
Shut off the IR in the camera, and get an IR emitter. Like one of these, they work great: https://www.amazon.com/gp/product/B01G6K407Q/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Then you point it wherever you want. Mount it just above the ground, and point it down the side of the house.
The...
Is it possible to put the username/password in the rtsp url?
rtsp://<username>:<password>@ipaddress
I don't use it personally, just throwing it out there.
I wonder if it's an SMB version 1 thing. I use NFS to a Solaris server instead of Samba, and it works great.
That being said, your Samba configuration, either in the smb.conf, or by default, might have SMB V1.0 disabled.
Small piece of plywood, painted to match the building. Screw it to the building, then screw the camera to the plywood. Although, I don't know what would happen if it rains.
The POE circuitry in the DVR (or your network switch) might be shutting down the power when it sees something "off". Does...