Recent content by anotherone

  1. A

    Blue Iris Windows 11 or Windows Server?

    This webiste shows a much easier way to upgrade without using rufus or messing with the registry. I've used it on 3 machines successfully. win11 upgrade
  2. A

    BI being sluggish

    Try lowering the frame rate to 15 frames per second and set the i frame interval to the same value. Make sure substreams have the save frames per second as the main stream and I frame the same as the Frames per second.
  3. A

    Blue Iris PC died and I’m not sure why

    If you press the windows key and enter "windows tools" there is a memory test that runs at boot up. You can give that a try, but it takes a LONG time. And it will stay at certain percentages for ever, like 21%, so just let it run for hours.
  4. A

    Ethernet Burial—Detached Garage Install

    here's a mount you can consider: b and h photo nanostation mount
  5. A

    Adding second camera at remote location

    Thanks for the help. I went with a 5 port tp-link POE switch figuring it would be more robust and easier to add a 3rd camera down the line. I'm slightly worried about heat build up but I have 9 months before that's an issue :)
  6. A

    Adding second camera at remote location

    I have a cheap 4mp camera (4mp camera on amazon) at my gate which uses a ubiquity nanostation to connect to the network. I'm running the LAN cable from the nanostation injector to a POE injector (Injector) and now I'd like to add a second camera - a 2mp PTZ uses less then 10 watts since no IR...
  7. A

    Hey I Need Help In Setting up a new Blue iris system (I am new to using this)

    In your camera settings, under RECORD, at the bottom in the setting for record format, are you recording direct to disk?
  8. A

    CPU Utilization error in BI??

    I have this same problem on the April 2023 release of BI so going back may not fix it. I mainly use it to just check on the memory usage to make sure it's not over 5gb.
  9. A

    EmpireTech 9th Anniversary (Summer)Sales

    Andy, if we buy a camera from you sight do we automatically get a lottery ticket or do we need to contact you with order number?
  10. A

    Help me determine the power consumption of my cameras and video system

    search for kilowatt usage meter on amazon. these just plug into an outlet and you plug your device into the meter. It will give you an idea of what each component in your system is using
  11. A

    camera times out in ui3 when going full screen

    Thank you all for the excellent suggestions! With no substreams enabled it works fine. And if I enable the second substream it works fine, but with first substream it does not. So I'll just enable the second one and leave well enough alone. Thanks again.
  12. A

    camera times out in ui3 when going full screen

    I put a PTZ camera model SD29204UE-GN 2mp. Works find in Blue Iris and in UI3 it shows up fine as thumbnail but when I go full screen it times out. All other cameras work fine in full screen mode. I'm running an older version of BI - 5.7.3.0 Here's some settings, any idea on what I should...
  13. A

    Ubiquiti Point to Point Questions

    Have you thought about a power line adapter. I have one running to shed 150 feet away and I get 200 mbs over it.
  14. A

    Front porch camera/conduit/junction box installation questions

    I'd go straight down and mount in the corner level with the top of the door frame. it really won't be that noticeable.
  15. A

    Reinstalling Blueiris after windows 10 crash

    Go to the directory that has blueiris in it and look for a ".reg" file. Those are the backup files and you should be able in import it into BI.
See more
Top Bottom