Recent content by Andyh747

  1. A

    DMSS Relay Output Control

    I think I know the answer to this but is there a way to control the relay output from a camera on the DMSS app? This can be done from the web GUI for the camera by pressing the little orange icon: However I don't think there's any way to trigger this on the DMSS app. Anyone found a way to...
  2. A

    Dahua nvr5216-16p-4ks2e defaults random camera names after reboot

    No you're not going mad but it appears Dahua are unaware of the problem. I've reported it to the technical team at my suppliers and they claim to not have heard about this issue before. I'm taking delivery of another 5208 unit this week so will test and see if the same thing happens. I agree...
  3. A

    Dahua nvr5216-16p-4ks2e defaults random camera names after reboot

    Same issue here and I fit a lot of these NVRs. Current one is the NVR5208-8P-4KS2 and after reboot many camera names default to Channel 1,2,3 etc. No pattern as some keep their names and others don't. Very annoying bug which Dahua need to fix.
  4. A

    Dahua NVR - rtsp stream for split view (multi view)

    Did anyone find a valid RSTP stream for the multi screen views from NVR? I've tried every combination but no luck at all.
  5. A

    Restoring Dahua NVR from Config Backup

    Just wondering if anyone has restored the configuration on a Dahua NVR from a backup on a USB? I’m replacing a like for like NVR. Same exact model. The previous one was damaged beyond repair but I have a copy of the configuration. Will this restore all settings from the previous unit onto the...
  6. A

    Dahua NVR API Keyboard Control

    Unfortunately not :(
  7. A

    No Access to one CAM Web GUI behind NVR

    Yes I found all browsers blocked the port. I don't think the port assignment is 10080 first as I installed 16 cameras and it was only on the last one that it assigned port 10080.
  8. A

    No Access to one CAM Web GUI behind NVR

    OK thanks to the steer from @bigredfish above I got to the bottom of the problem. Resetting didn't help as the camera was still not accessible on any browser with the same message. After following the link it turns out the browser was blocking the port but every browser was blocking the port...
  9. A

    No Access to one CAM Web GUI behind NVR

    I’ve tried every browser I can. Chrome, Edge, Firefox. All the same. It must be related to how the camera was added by the NVR as all others are fine on every other port. It probably didn’t help swapping ports around. I did that as I needed ePoE for this camera as the run was more than...
  10. A

    No Access to one CAM Web GUI behind NVR

    OK I checked the password and all well on that front. Just for additional info when I try to load the web GUI for that camera from the registration page I get the following displayed: This site can’t be reached The web page at http://192.168.88.9:10080/ might be temporarily down or it may...
  11. A

    No Access to one CAM Web GUI behind NVR

    Yes green dot next to camera. You are correct that I had another cam plugged into Port 4 and swapped that to another port. Password issue is possible but then wouldn’t it show a red dot as it wouldn’t be able to connect? I’ll check the password anyway and see what happens when I enter it...
  12. A

    No Access to one CAM Web GUI behind NVR

    On the Registration Page it’s showing Port 4. The other cameras show the Port representing the port they’re plugged into As well.
  13. A

    No Access to one CAM Web GUI behind NVR

    Hi All, I know this scenario has cropped up many times but this situation is a little odd and hope someone knows what's happened here. I have a 5432-16P NVR and have 20 cameras connected to the NVR with 16 via the PoE ports on the NVR. All of the cameras have installed fine and are all...
  14. A

    Dahua NVR Push Notifications

    Just for info for anyone else I was always confused as to why I got the "Failed to Subscribe" message when I wasn't signed in as admin. I always thought it best not to have the app signed into the main admin account for security - yes I know all the risks with port forwarding and P2P which I...
  15. A

    ***PSA for those with a New DAHUA NVR with Built-in PoE switch

    That depends on the NVR and Camera. It’s not that easy to understand but some NVRs have AI capability (those models with an I in their model number). That means they can carry out the analysis rather than the camera and generate events. However if you also have AI cameras then you can choose...
See more
Top Bottom