Recent content by AlanN

  1. A

    Can't remove camera from bracket

    Just to close this off, internally the camera doesn't look bad, what I thought was condensation inside the dome was particles of salt/paint from the alloy housing I considered cleaning everything , drilling tapping for new screws, hammerite painting, buy a new bracket .... but in the end it can...
  2. A

    Can't remove camera from bracket

    This is what happens to an IP67 Hikvision after @ 30 months... The plate alluminium plate itself was ok, but the alloy casing had gathered salts and no way was the dome for rotating Only way to get it down was brute force and ignorance, after leavering with a suitable crowbar it was the pillars...
  3. A

    Can't remove camera from bracket

    I'll try a dose of oil when I get some time . I live on the South coast almost on the beach so the corrosian is to be expected externally, the inner dome has condensation which was the start if this The silicon seal looks in good shape might carefully try a blade between that and the casing...
  4. A

    Can't remove camera from bracket

    Paint on the metal camera hasn't lasted too well
  5. A

    Can't remove camera from bracket

    Anyone got any tips for seperating a Dome camera from a wall bracket. its a DS-2CD2185FWD-I but expect any similar would be the same Attached to a wall mount bracket about 30 months ago, its outdoors and fairly exposed to sea air I have loosened the side screw but cannot get the camera to twist...
  6. A

    Unable to access LiveView remotely on 1 of 4 ip cameras using IE11

    Interesting thought, I for sure have UPnP switched off on all 4 cameras, unless it was on by default I wouldn't have switched it on. I'll need to double check the router to make sure it's off. If there were any UPnP ports opened on the router (BT Home Hub6) they must be hidden, I'll need to...
  7. A

    Unable to access LiveView remotely on 1 of 4 ip cameras using IE11

    I think that might be a job for a rainy day, but maybe worth a try
  8. A

    Unable to access LiveView remotely on 1 of 4 ip cameras using IE11

    Hi, I have 4 cameras 3 PoE and 1 WiFi , this is about one of the PoE Cameras as follows with firmware levels #1 DS-2CD2142FWD-IWS V5.5.0 #2 DS-2DE3304W V5.5.3 #3 DS-2CD2142FWD-I V5.5.0 #4 DS-2CD2185FWD-I V5.5.5 Internally all 4 work fine on iVMS-4200 and IE11 with...