Recent content by AKalm

Ok, I have all kind of English firmwares, NTSC, PAL, some different models too, here's a link for it. However, still double check which one you want to try. Anyway the camera doesn't let you do one which does not match the camera. But no responsibility from me :) Dahua

Still stuck with: System has no SupportLanguages But from my experience is that you have to try as many fw-s as possible and one should work. I have a ton of them, do you want to try them 1 by 1 or you got already most?

Any ideas what firmware should I try to upgrade my HDB4300C? I can't find the proper one (tried >30). All upgrades succesfully, but sonia fails to start

Have you tried this to enable telnet? Enter to the browser: http://<ip-address>/cgi-bin/configManager.cgi?action=setConfig&Telnet.Enable=true

I see, my cam had telnet open all the time. Keep in mind it might have a reboot-loop so you'll kind of have to catch it. Otherwise you're cam's firmware is not running telnet by default - your next step would be serial connection

Should be port 23, if the same happens, it must be sonia crashing all the time. What I did I logged in very fast and typed appauto 0 and hit enter (did succesfully after 30 tries), so when next time boots, it won't try to start sonia. When you've done what you wanted, don't forget to enter appauto 1

Couldn't get far yet, with missing dependency 'cramfsck'. Anyway, I've found a firmware with the date 2013 08 and we're on halfway! Can see in configtool, however, can't modify the parameters. It might be wrong port, I'm assuming that 37777 is not open, and web interface is not coming up...

I have a nice error on my HDB-4300C, and would use this tool to bypass the nolanguage error. See the result from sonia: .............. 03:55:14|[Manager] info CMagicBox::onConfigAutoMaintain day = [2], hour = [2], min = [0], enable = [true] 03:55:14|[Manager] info CMagicBox::startDstTune...

It is possilbe - seems like they have deleted the region to let their firmware install on it.. anyway someone told me he could do it but he doesn't have time for me (would take a day or two).. I didn't have time to look into this, but I think that has to be the solution Added: I will try to...

Well for me, what I can see from the output is this:System has no SupportLanguages - then sonia doesn't start because it can't copy the language file to wherever it needs to - seems like the region chip is empty?!

I have the same problem, my HDB4300C updates properly, but web interface still doesn't come on, and open ports are only 23 ad 3800 where I'm upgrading from configtool. Looks like my language flag is missing from the chip, and sonia can't start. None of the firmwares work for me. Any suggestions?

Anyone else any ideas, starting points? Does anyone have chinese firmware? That's the only one I couldn't find

Yep sorry guys, I was looking for the <> icon, didn't find the +, will do like that from now. I see, well there was one moment where all this could have happened - I've set the camera to DHCP in configtool, and I could have unplugged it too early, before it actually said done/complete. I don't...

Well, I was just wanted to check if there's a SimpChinese or English language found, so the reboot could be caused by region mismatch that doesn't let sonia start etc.. Pasting, there are a lot more before:# ... Fail to get env authcode! 21:49:03|[libpdi] Get authcode error 21:49:03|[libpdi]...

Hi everyone, I'm posting this question because I gave up on trying all firmwares, checking all related forums, etc. My HDB4300C mini dome camera has stopped working, it became bricked with reboot loop. Managed to stop it, and found out that when sonia wants to start, it doesn't find any...