Recent content by actiongte-net

  1. A

    [SOLVED] All cameras are out power outage

    I go I got them all working again, I had to reset every one of them and re initialize them on the bench then reinstall and re aim. It was a good time.
  2. A

    [SOLVED] All cameras are out power outage

    Thanks for all the help. Ive found out that the 2 cameras that work are on a 255.255.255.0 subnet. I initialized the other cams using this. Turns out they will only work on 255.255.252.0. Any ideas what would cause this. Ive always used 255.255.255.0.?
  3. A

    [SOLVED] All cameras are out power outage

    Thanks for the help. I installed all the cameras myself. cameras have been up for 1-2 years and have been fine to the power outage. ive taken 1 (dahua) cam down and reset it. I can read its config but can't access it over the web or change its ip. Im going to remove another cam, check the cable...
  4. A

    [SOLVED] All cameras are out power outage

    Im just north of Tampa FL and we lost power after milton for 18 hours. I have a generac whole house generator. It ran just as advertised. After the power came back all my cameras seemed to be working. I am viewing the cameras with security spy on the mac. I turned on the monitor today to check...
  5. A

    new dual camera with night display issue

    I hadn't realized it was "seeing" the house. It's much better with the illuminators off and the house light on. Im going to move the camera itself to the corner of the house and see how it goes. I was so impressed with the field of view that I didn't really notice that the side of the house was...
  6. A

    new dual camera with night display issue

    Thanks for the help. All I could see in the settings is a global control. It looks like 1 camera. I turned off the illumination and I'll see how that goes. I don't really want to move the camera any more to the left. I do have a large driveway led light that I usually leave on, I'll just turn it...
  7. A

    new dual camera with night display issue

    I just purchased this cam from andy on amazon. EmpireTech 4K Full-Color 2×4MP Dual-Lens 1/1.8" CMOS Smart Splicing Network IP Camera. Im thrilled with the field of view. At night though I'm having an issue. The left side picture is great, the right side is foggy. I did peel off the protective...
  8. A

    New router, now I cant connect to my cameras

    I was using 2 unv night hunter cameras with no problems. my network was 192.168.1.1. my router failed and I replaced it with the eero mesh. the eero uses 192.168.4.1. I cant log in to my cameras using the web or the eztool utility. these cameras do not have a reset button. Any suggestions? will...
  9. A

    Uniview Cameras, new NVR?

    Did you purchase your nvr from nellys? They have a 3 year warranty. If you get another uniview nvr I'd probably order from them.
  10. A

    Best Standalone NVR

    Nellys has a new r series dvr that uses an app for web viewing. They claim plug and play without having to open ports etc. Their support has always been fantastic.
See more
Top Bottom