Recent content by 8trek

I thought i was imagining this but after reading your last post that must be what's happened to me in the past too. Like you said, how is it possible for BI to change a camera setting? I have all the motion settings set to zero squares, low sensitivity, etc.

Thanks for that as well... just disabled 2 that i found... will see how long this lasts. Again, appreciate you taking the time to respond in detail.

Thanks, that appears to have solved the happy trigger issue. More time will tell. Regarding IE in my experience when you change the bho folder after about a day or two due to presumably windows updates you have to repeat the process. Currently i'm adding the camera's http address in the white...

Bought this thing about a year ago from Andy. Not a fun camera to deal with since you cannot use any browser but the now obsolete Internet Explorer browser which requires jumping through many hoops but I digress. Depending on the time of year including now it is constantly triggering and auto...

okay this is weird, as soon as i posted now it's working, the only thing i did was check on the config button next to ONVIF/camera events which is a new feature but didn't do anything with it, now when i open this config option the listen for section at the bottom appears different with green...

About a year ago I purchased this camera based on a recommendation in this forum. Happy with the camera however recently not able to get any external triggers from this camera. I've been trying to figure out what changed and different things but no luck. Basically just want to get alerts only...

Nope... deader than a doorknob.

I'm using the additional round mount thing also purchased from Andy along with rubber access port to it. Checked for water intrusion and it was dry as a bone as was the sealed connection around the net cables. The entry port is pointing down as well so water can't get in.

Just to clarify, I put the new switch in weeks ago, the camera died on Friday during a rain storm. I'm not using any plug in power for the camera, just through the poe switch. Does this method you are describing work in this scenario? Thanks.

After all of this it appears my POE switch sucks. Here's what i got and has solved all stuttering issues: https://www.amazon.com/dp/B0876YM2D4?psc=1&ref=ppx_yo2ov_dt_b_product_details Could be either the brand made the difference or 1G speeds did despite what I've read about cameras only...

Doing as you suggested did not improve the matter, but yes I did try that. As of late cpu usage has been been around 30-50% on average. Have been utilizing a combo of ivs and deepstack (cpu version... never could figure out how to get the gpu version up and running but will still like to give...

The stuttering is noticeable just watching the wind blowing the trees around but always seen as cars drive by (25mph neighborhood) or to a lesser extent when people walk by. Okay well after trying all the various things mentioned and not seeing any improvement here's what i've discovered...

I don't know what else to try besides getting another poe switch. Any other thoughts? Are your 4k cameras perfect? I mean maybe i should expect a little stutter and my expectations are too high? I don't think so cause it's pretty bad at 8192. Anything higher than that I'd imagine would be...

Answering all questions posed up to this point. As stated before all cameras are set to 15fps with matching i frame. Changed auto negotiate to 1gbps (didn't help) Nothing wrong with cables as this is happening to all 4k cameras. Only using 1 ivs rule per camera. Tried disabling those to see...

To clarify... I'm running 4096 @4k/8MP any bitrate higher makes the problem much worse. Yes the downside I see to lower bit rates is the image isn't as good but as you've said it's more important to get good motion image vs. static. So are you saying I should be able to run higher bit rates...