0460dirt's latest activity
-
00460dirt replied to the thread LV-PD50208 firmware 5.4.0.Hope you are saving older versions of your software. On my cams, the latest firmwares as in plural, started removing items from the cam...
-
0The camera is indoors, I have a Lorex NVR and that camera is working fine on it. I used the same settings as the other lorex camera I...
-
00460dirt replied to the thread No Signal Somethings.All outdoor cams that in any way water can make it into the harness need butyl rubber tape on the connections. Even a good idea to use...
-
0It does until it doesn't... There will be an instance that motion activated misses....but to each their own LOL.
-
00460dirt replied to the thread Helpful tip.My cams catch from the street. So anyone who steps or poops on my grass gets a free photo.
-
00460dirt replied to the thread Helpful tip.Used to run 24/7 records. Now I'm doing when triggered only with increased 10 minute max triggers. Catch 30 seconds prior and up to 10...
-
00460dirt replied to the thread Helpful tip.Yup using the cheap 2.5 inch SATA drives. I have about 10 laying around. Of course not with the OS installed on it. All separate of...
-
00460dirt replied to the thread Getting duplicate push notifcations.Either retriggers or you are triggering from the cams and BI maybe? Disable all triggering from your cams UNLESS you have strobes and...
-
00460dirt replied to the thread Is a few dozen / day "no signals" in status normal?.I just posted a tip that might help you guys. For me it was my spin drives going to sleep. Installed a cheap 512gb SSD. No more lost...
-
0I ran BI on a Windoze mirror array with 2 spin drives for storage. Would notice when the drives went to sleep, even after I told them...
-
00460dirt replied to the thread Fine Tune/Filter ONVIF Triggers.Start with using one triggering device to start till you get the understanding of how they work. 1.Use BI to trigger from. Turn off all...
-
00460dirt replied to the thread Problem with Picture Overlay in DS-2CD2046G2-IU.Download the browser plugin.
-
-
00460dirt replied to the thread Hikvision Panoramic DS-2CD2387G2P-LSU/SL firmware issues.Oh I use on cam motion so I can get the strobes and audible alerts to fire when triggered. Or does anyone know how to fire the strobes...
-
0Anyone else notice with all the new firmware revisions that the triggering is getting worse and worse? As in getting on the dot every 5...
-
00460dirt replied to the thread Fine Tune/Filter ONVIF Triggers.Start with BASIC triggers first. Leave the advanced stuff alone till you get the BASIC stuff under control. Don't start turning on all...
-
00460dirt replied to the thread New 2CD2387G2-LISU/SL not auto switching to supplement light.Several things to me, might be wrong with your config. I'm no expert like the others on here. 1.Do you need dynamic anal for motion...
-
00460dirt reacted to John Williamson's post in the thread New 2CD2387G2-LISU/SL not auto switching to supplement light with
Like.
It's likely your cameras are staying in colour as the shutter speed is set too slow and there's sufficient light. I think (not tried)... -
00460dirt posted the thread Who has enabled their alarm output to turn on their water sprinkler irrigation systems? DOGS!!!!!!! in Hikvision.Talking about the, rude, neighbors, slash animals, that bring their dogs to POO and urinate on your grass. My cams have strobes and...
-
00460dirt replied to the thread Moisture Inside Hikvision Turrets (Cloudy Lens).As stated above, use silicone grease only. No Vaseline or any other automotive style petroleum formulated gooo. Plumber's grease is...
-
