So I tested both 80 and 81 and both failed, I tried changing to port 81 but nothing. I am not to versed in the router setup stuff, I know I had port forwarding enabled. My settings for the WAN setup should not have changed so ?With BI open, go to canyouseeme.org and put in BI's port to check if it's open.
And where it says "Your IP", you're saying that jives with the WAN IP in the BI app?
Try 8080, in the router forward it to your BI server's LAN IP.So I tested both 80 and 81 and both failed, I tried changing to port 81 but nothing. I am not to versed in the router setup stuff, I know I had port forwarding enabled.
Maybe they "....should not have" but as I asked in post #5, "And where it says "Your IP", you're saying that jives with the WAN IP in the BI app?"My settings for the WAN setup should not have changed so ?
Yes they jive both places have the same ipTry 8080, in the router forward it to your BI server's LAN IP.
no connection, do I leave the port on 80 in the "web server" tab, i tried leaving it and changing it to 8080, and edited the forwarding on the router
Maybe they "....should not have" but as I asked in post #5, "And where it says "Your IP", you're saying that jives with the WAN IP in the BI app?"
I tried and to no avail, but my LAN for the BI server had changed form what it had previously been. I tried changing the ports in BI and on the router with the new LAN address and tried switching the LAN back to the old address with port 8080 and with same outcome.No, change the port in BI web server tab to 8080, forward port 8080 in router to BI server IP.
Likely!Now noticing the BI PC is picking up a wired ip address and a wireless ip address, could this be causing the issue?
set BI PC with static ip and tried all the scenarios mentioned above and still cant get app to open, LAN and WAN refresh to adjusted ports when I change themLikely!
The BI server can only have one IP address in the web server section.
In the Ethernet port for the BI server, in Windows, make the IP static.
no my WAN has been consistent throughout the changesdid your Wan IP address change again?
And you logged into the router, forwarded port 81 to 192.168.1.12 and saved it?clicked the bind button and nothing, banging my head!!!