Baldcamman
Pulling my weight
I have 16 Dahua cameras and all have tripwire working very well. I cannot seem to get these to work with tripwire. What am I missing here.
new IPC-T5442T-ZE tripwire issues
- Thread starter Baldcamman
- Start date
bigredfish
Known around here
Need a lot more info.
So you can’t get 5442-ZE to “work” with tripwire?
nvr? Is it set to record IVS?
Show camera IVS rules pic
Did you set IVS on the camera itself?
Have you walked in front of it and tested?
So you can’t get 5442-ZE to “work” with tripwire?
nvr? Is it set to record IVS?
Show camera IVS rules pic
Did you set IVS on the camera itself?
Have you walked in front of it and tested?
Baldcamman
Pulling my weight
Ivs is set on NVR as are all the others except pTz's. All rules are set in event ivs and smartplan is turned on. I rebooted camera and at least it is working some. I just didn't know if with the AI equipped camera if there was something else to pay attention to outside the normal settings.
Thank you
Thank you
Baldcamman
Pulling my weight
I have always used the nvr for this. But if I can't get it to work like the others, I will redo everything in the camera.
Baldcamman
Pulling my weight
So playing around yesterday the camera started tracking ( Box around object ) and doing well, today nothing. Set everything up on camera so we will see. I remember now why I liked the setup in the nvr, I could see what tripped it on play back because the tripwires showed in the play back.
Baldcamman
Pulling my weight
setup everything on camera. Can see tripwires. The tracking box that usually surrounds object never shows up. This is only with the two new cameras, all others working fine.
Baldcamman
Pulling my weight
bigredfish
Known around here
Your min/max size values are a mess. Likely part of the problem.
Set max to full screen size, min to 0-0
Draw a single tripwire line from extreme top right of the screen to the very base of that object standing in the corner on the left. That will cover the screen door.
Then draw a second tripwire from the middle white beam directly to the bottom of the screen in front of the entry door. That will cover that door.
Example
Set max to full screen size, min to 0-0
Draw a single tripwire line from extreme top right of the screen to the very base of that object standing in the corner on the left. That will cover the screen door.
Then draw a second tripwire from the middle white beam directly to the bottom of the screen in front of the entry door. That will cover that door.
Example
Last edited:
Baldcamman
Pulling my weight
Thank you
I will give that a try.
Any reason the tracking box doesn't show up at all ?
I will give that a try.
Any reason the tracking box doesn't show up at all ?
bigredfish
Known around here
I've had various firmwares treat the tracking boxes differently. Different colors and functionality. At the end of the day, for most residential owners it really doesnt matter. The thing to look for is the tripwire being tripped and flashing red when activated. The tracking boxes are really meaningless on fixed cameras.
Baldcamman
Pulling my weight
Made the suggested changes and it might trip 10 percent of the time.
All my other camera trip about 90 percent of the time.
We go in and out that door all day because of new puppy.
All my other camera trip about 90 percent of the time.
We go in and out that door all day because of new puppy.
bigredfish
Known around here
Hmmm odd. Try intrusion boxes. I tend to overlay both and get 95% + success at multiple locations
You did adjust the min/max size right?
You did adjust the min/max size right?
Baldcamman
Pulling my weight
Yes max full and min 0
Drew line how you suggested.
Thank you
Drew line how you suggested.
Thank you
bigredfish
Known around here
I suppose it could be a firmware issue...?
Example using tripwire and intrusion together, I get great results
No h.265
No smart codec
Period is set to 24/7
You already changed the min/max size..
How are you verifying rule activation? Do you have smartpss? You can view it live and see if the rule line is flashing red when tripped. Look in playback and see colored hash marks for IVS events?
I wouldnt rely on DMSS app notifications myself..
Example using tripwire and intrusion together, I get great results
No h.265
No smart codec
Period is set to 24/7
You already changed the min/max size..
How are you verifying rule activation? Do you have smartpss? You can view it live and see if the rule line is flashing red when tripped. Look in playback and see colored hash marks for IVS events?
I wouldnt rely on DMSS app notifications myself..
Baldcamman
Pulling my weight
I only use smartpss for virwing live and no setups in it.
I like using nvr because the trip wires show up in playback.
They do not if setups are on cameras.
But it still logs on playback with orange bar. At work so can't give examples now.
I like using nvr because the trip wires show up in playback.
They do not if setups are on cameras.
But it still logs on playback with orange bar. At work so can't give examples now.
bigredfish
Known around here
Yes I only use SmartPSS for live view and playback/download. It also shows IVS live and playback and on the timeline. Much easier IMHO than the NVR interface.
Baldcamman
Pulling my weight
Yes smartpss is setup to auto login for my wife and kid so if the pc goes down they can bring cameras back up with no options but viewing.
I've had this nvr for a few years and have upgraded several cameras and not had trouble until now. I have never upgraded firmware in fear of problems or bricking nvr. Maybe it's time to suck it up !
The dahua is a NVR5216-16P-4KS2E and will just have to search for safest firmware upgrade.
A buddy of mine wants it and some of the 2mp cameras I am updating now.
Maybe I should buy a new NVR5224-24P-4KS2 for the new stuff, let him have the old system witch he know I haven't upgraded.
I've had this nvr for a few years and have upgraded several cameras and not had trouble until now. I have never upgraded firmware in fear of problems or bricking nvr. Maybe it's time to suck it up !
The dahua is a NVR5216-16P-4KS2E and will just have to search for safest firmware upgrade.
A buddy of mine wants it and some of the 2mp cameras I am updating now.
Maybe I should buy a new NVR5224-24P-4KS2 for the new stuff, let him have the old system witch he know I haven't upgraded.
Baldcamman
Pulling my weight
This is the firmware now
NorthBendDave
Pulling my weight
I upgraded my firmware to:
| V4.002.0000000.2.R, Build Date: 2022-01-20 |