Can I access somehow SD Card remotely (without removing/opening device)?Not sure. It's POE, and im not sure if something like that exists? power is fed through the RJ45 port, through 803.11 spec.
Thank You
Can I access somehow SD Card remotely (without removing/opening device)?Not sure. It's POE, and im not sure if something like that exists? power is fed through the RJ45 port, through 803.11 spec.
It does make that voice 'calling now' and/or 'call was not answered' if you dont pick up - but they can be disabled in the options.
Mine is hardware disabled right now due to the zwave sensor I have added - the resistor I added doesnt allow the voice to be triggered which I like better.
I don't know on how to disable the sound, but for the see if someone is in front of the VTO cam: add the VTO as an additional channel in your NVR, and add motion detection on top of it. This will, off course, only work if there is no street (eg passing vehicles) in front of your camera. Then your NVR can send push notifications to your app.Please, does anybody know the solution, where in the options to turn off the "calling now..." speech...and my second question is, how to make it happen, that I can see and hear if somebody is ringing at the front door on my app, when I'm not home (over the internet), it is connected over PoE with own local IP.
I have Dahua cameras and NVR installed and everything is working fine with the apps.
Hi, unfortunately, I've got a "basic" VTO2000A (see [Review] VTO2000A & VTH1550CH & VTNS1060A Intercom Kit), at one time, I did get a "ring" signal on my GSM, however I could not "pick up" the line. However with the VTH it did work. Then some updates came to the app, and out of the blue, it did work on my LAN (when I am home, that is). To make it work when being outside/abroad, I do have a VPN server in place, which helps the configuration of i/gDMSS plus: I did not use P2P or any other trick, I only configured it to connect to my local IP (VTO 10.10.x.x). So when NOT having the VPN tunnel open, I do receive a push notification that the button is pushed, however I cannot open the communication channel, as the VPN tunnel needs to be opened to reach the 10.10.x.x. It only takes 2 seconds to connect, and I'm still able to fetch the call.Thank you for your reply. The VTO is facing a road with some traffic...I managed to see the picture and to unlock through the app (it needs a scan of the SN and to connect it in the P2P option in the app, not the IP as the cameras). But still...how can I make it ringing on my phone, if someone press the button and I'm not at home? This option was actually the reason, why I bought the Dahua VTO.
Do you have gDMSS Lite or the Plus version? Open it up, choose "door intercom", go to device manager, delete everything. Then re-add the cam by the LAN IP address. Try the live feed again. If that's ok, that's step 1. Then have a look in your router/firewall whether port 2195 is closed. If it is, it will not ring at all. Otherwise, open it up. That should fix your problem!hello
I do have in my LAN and in the Internet (when I choose Live Preview) a live picture and I can open the lock and talk...it is just not ringing in the app, I can't find the option to enable push notification in my mobile device (OnePlus3).
Did you do port forwarding or port trigger?ok...It works now in my home network and in the internet ... I opened ports and voila...
Thank you, for being patient with me as noob
Port 2195 for push notifications is an OUTBOUND connection. If push notifications are not working, this means that your NVR/IPC cannot reach the push notifications servers who are listening on port 2195. Port Forwarding means that your internet router is forwarding a port (eg 31337) on your WAN ip to a LAN ip. Port trigger is when someone knocks on port 31337, something else happens (eg opening port 22). Both are not the techniques you are looking for: if your router has a firewall which blocks internet access from NVR TO the internet, you need to open port 2195.Did you do port forwarding or port trigger?
My VTO2111 does not record anything on a SD card.Hi all, can anyone advise if you install an SD card to the camera, it will take a photo each time the button is pressed?
If in the event some one presses the door bell and I happen to miss the alert on my phone, I'd like to know who was actually there. Would be great if this can be viewed remotely?
The other option I could connect the LAN cable to my hikvision ds7608ni-i2/8p and hope I can get it to communicate by that and set the motion detection alerts.
Thanks
The VTH has a built-in chime yes, it will "ring" and show the video footage of people ringing at your bell.will the VTH1550CH work as a inside door bell/chime, rather than the hack? Video Intercom/Products/DHI VTH1550CH - Dahua Wiki
I will be connecting vto2111D via POE to the existing dahua NVR with 4 dahua IP camera system
Hi @dudemaar, I do not have hands-on experience with the VTO2111D. With the VTO2000A, POE would only work with the required VTNS switch, plugging that VTO into an NVR did not work. So do check the specifications first.Thanks catcamstar. Is it possible to plug the vto2111D directly into NVR4108-8P-4KS2
nvr and still have it work like a doorbell with iDMSS app and the VTH? Or do I need a Poe injector/switch to LAN?