Two of my newer IP cams (e.g. Jennov and Vikylin/PanoEagle) utilize an app called "VideoLink" for access and control. Both cameras have auto-tracking feature enabled. Problem is, after the cameras track motion to some position, they stay in the position where the movement stop and do not return to the original location of view. I have other auto-tracking cameras (e.g. JideTech) which use HiP2P Client IP Camera which return to the position they were looking before the motion was detected and tracked, usually the last position of view.
Question is, is returning to the last set position of view a function of the camera firmware/software or some setting I am overlooking within the VideoLink app?
I don't recall seeing a independent setting within any of the configuration pages for any of the auto-tracking cameras when accessed directly through the browser, but I am kinda new to the auto-tracking feature included on some of the newer IP cams.
Thanks
Question is, is returning to the last set position of view a function of the camera firmware/software or some setting I am overlooking within the VideoLink app?
I don't recall seeing a independent setting within any of the configuration pages for any of the auto-tracking cameras when accessed directly through the browser, but I am kinda new to the auto-tracking feature included on some of the newer IP cams.
Thanks