The latest available firmware contains important security updates as well as addresses the following bugs:
The procedure for upgrading to the latest version is as follows
- Addresses a bug that the patrol speed will display incorrectly after setting;
- Fixes bug where some parameters were lost after downgrading to version 54
The procedure for upgrading to the latest version is as follows
- Firstly determine which firmware version currently exists on your FI8910W by checking under Settings > Device Status. You are looking for the "Device Firmware Version"
- If you have Device Firmware Version 11.37.2.XX proceed to download and install the latest version 11.37.2.56 here
- If you have Device Firmware Version 11.22.2.XX proceed to download and install the latest version 11.22.2.51 here
- Please follow carefully the instructions contained in "How to upgrade firmware for MJPEG indoor PT camera.pdf" included in each download. Failure to install the firmware correctly could result in bricking your camera. If you are unsure on how to proceed, please stop immediately and post on the forum.