Day/Night mode is not working correctly

[RJM_50]

It took a while for my IPC-B54IR-Z4E-S3 to start changing correctly at dusk and dawn. But my IPC-T54IR-ZE-S3 still won't change from day to night. Both have identical settings, with the few days the Bullet was acting up, I'm not sure if either have the right settings, the settings for sensitivity and delay are grayed out and not available to adjust.

 

[TonyR]

.....the settings for sensitivity and delay are grayed out and not available to adjust.

You might try going to "conditions" => "profile management" tab, select "full time" (not "day/night") then "save"

 

[RJM_50]

You might try going to "conditions" => "profile management" tab, select "full time" (not "day/night") then "save"

I don't have that option available