Verifocal zoom powers

Rakin

Pulling my weight
Joined
May 27, 2019
Messages
216
Reaction score
147
Location
US
When adjusting a verifocal for a location how do I tell what power or lens size I have adjusted to? For instance my 5231 goes from 0 to 2390 and I’m trying to figure out what fixed lens I need for that location


Sent from my iPhone using Tapatalk
 

Walrus

Getting comfortable
Joined
Nov 19, 2018
Messages
593
Reaction score
449
Location
Ontario
By scaling the number. I'm assuming IPC-HDW5231R-ZE with 2.7mm-13.5mm zoom. 0 = 2.7mm. 2390 = 13.5mm. That gives 10.8mm adjustment. 10.8mm/2390 = 0.0045mm per point.
If you have it at say, 1350, that would be (10.8/2390)*1350+2.7mm = 8.8mm
 

Rakin

Pulling my weight
Joined
May 27, 2019
Messages
216
Reaction score
147
Location
US
By scaling the number. I'm assuming IPC-HDW5231R-ZE with 2.7mm-13.5mm zoom. 0 = 2.7mm. 2390 = 13.5mm. That gives 10.8mm adjustment. 10.8mm/2390 = 0.0045mm per point.
If you have it at say, 1350, that would be (10.8/2390)*1350+2.7mm = 8.8mm
Ok makes sense. So 200 is going to be 3.6. I appreciate it


Sent from my iPhone using Tapatalk
 

Walrus

Getting comfortable
Joined
Nov 19, 2018
Messages
593
Reaction score
449
Location
Ontario
You got it. It might possibly be not quite so linear, but close enough.
 
Top