Need to add license after each reboot

Joined
Dec 16, 2016
Messages
1
Reaction score
0
Location
Michigan
We have a standalone license which has tells us its been entered too many times and must be reset. The problem is that I have to enter this license every time the PC is restarted. Each time I add it, the license inserts properly and validates and allows me to work with all cameras. Next reboot... it's like I never added a license.

I've got multiple locations, each with a Blueiris install and each running 2 to 6 cameras. None of the other locations have acted this way. We've been using Blueiris for years.

Each computer is a DELL i7 with 16GB Ram and 2TB disk. They are dedicated to only BI, clean with no additional software running. I partition the C:\ for the software and the D:\ for the recordings, rotating every 15 days.

Thanks for any info you can share with me. Especially if you've ran across this before.
 
Top