IVS works till midnight, than its over

[M5F10]

I've a problem and I don't know how to fix it.
I've a SD95230U-HNI It's a dome camera with 30X zoom and PTZ. I've some of them, all the same problem.
Problem:
I can program IVS only on the camera, not on the NVR. It works perfect.
In the setup I set to all day from 00:00:00 to 23:59:59.
Every time at midnight : 23:59:59 it stops working. The IVS lines are still there. To have it working I must go to webUI of the camera to IVS and only push save. It works again till midnight. I've to do the same procedure to get it working.

What can I do to fix it?

 

[nayr]

reset the camera to defaults and try again.. seems more you monkey with the camera the higher the chances are of getting a funky config. Resetting to defaults and manually reconfiguring it right the first time seems to fix it usually.

 

[M5F10]

I 'll try it. Good starting idea.

 

[M5F10]

How can I reset the camera only with the hardware or can I take default in the webUI to reset?
A reset on the camera is not so easy, because my camera's are all mounted on the wall.

 

[nayr]

the WebUI

 

[M5F10]

Thanks, I've done it, waiting now till midnight, a littlebit more than an hour.

 

[M5F10]

nope, still at midnight it stops. Could this be a bug.

Verstuurd vanaf mijn SM-G930F met Tapatalk

 

[charcam]

Try with two periods such as
00:00 to 07:00
23:00 to 24:00

That works for me. Normally one period can't be over midnight. It will be case if they use cron job for scheduling.

 

[M5F10]

Thanks, I"ll try it.

 

[M5F10]

no, it doesn't work. Can it be the time which is controlled via web?

Verstuurd vanaf mijn SM-G930F met Tapatalk

 

[charcam]

At beginning my settings were working perfectly. After some changes, I got alerts randomly. Just rebooted NVR. It seems like the problem is fixed. Will see in one or two days.

 

[M5F10]

I think that I"l reboot every day at 24:00 hour. After reboot I think it will work. I give it a try. Is rebooting bad for the equipment?
Anybody an other solution?

 

[M5F10]

It's working.

Is rebooting good for the equipment?