Homemade Mount For New Dahua PTZ

[Parley]

In a couple of months I am going to upgrade this existing Dahua PTZ with a new 4K version. Maybe the new one with the 1/1.2" sensor or the old standby with the 4/3" sensor. So in preperation I have made a new mount out of 1.125" aluminum chanel and 1/4" aluminum plate. The bottom plate matches the 21 degree slope of the roof line. I will use 5/16" lag screws to mount to the big wood beam. Here are some pictures. First the camera that will be replaced and the location. Then two of the new mount.

 

[tech101]

Wow very nice! any word on new ptz yet. I am also waiting for the catalog will more than likely add another one

 

[Parley]

Wow very nice! any word on new ptz yet. I am also waiting for the catalog will more than likely add another one

Me too. I looked at the Hikvision version with the 1/1.2" sensor and it appears that the Dahua PTZ with the 4/3" sensor has better light gathering specifications. I will wait and see what Dahua comes out with before I place my order. I am also waiting on the 5442-Z12 model to come out. When that one comes out I will play musical chairs with 3 cameras.

 

[tech101]

omes out I will play m

Yea 4/3 seems to be better for light gathering than 1 1.2 also I want one PTZ in my setup with Laser so that way if @ night I wanna zoom in further down the street I can with sharp focus assisted by laser IR..


That 5442-Z12 I think there was one for LPR with dual camera which Is kinda cool one can be lpr and another lpr overview