Hikvision PCB DS-803015 - What NVR?

Purduephotog

Getting the hang of it
Joined
Oct 30, 2016
Messages
204
Reaction score
77
The EZViz NVR I bought as a set with 4x 4k cameras (none of which are running a webserver) has a PCB mark on it saying it's the DS-803015, Rev 1.0.

I've been scraping as much web as I can to find it, but I can't find a single NVR photo of this board. I doubt it's new- it's just figuring out what it is.

Eventually (when the connectors get here) I'll hook it up to the TTL and watch it boot for more info.

Thanks in advance-
 

Redy321

n3wb
Joined
Nov 20, 2020
Messages
1
Reaction score
0
Location
Washington
The EZViz NVR I bought as a set with 4x 4k cameras (none of which are running a webserver) has a PCB mark on it saying it's the DS-803015, Rev 1.0.

I've been scraping as much web as I can to find it, but I can't find a single NVR photo of this board. I doubt it's new- it's just figuring out what it is.

Eventually (when the connectors get here) I'll hook it up to the TTL and watch it boot for more info.

Thanks in advance-
I want to advise you to contact the services for the circuit board design . It is very difficult to say something about your case and it will be very difficult to find a person who knows something about your situation. I had a problem almost like you and I realized that some boards are very old or just unique and the best solution is to ask for help from specialists. I also repaired my brother's computer in the same way, we made diagnostics of his Board , by the way, it was also printed to order. I will be honest, I am not an expert but I used such services and it helped me.
 
Last edited:
Top