Hikvision DS-2DE2A404IW-DE3 Corrupts after OnVif from Ip Camera Viewer Pro on Roku

lombana

n3wb
Joined
May 25, 2021
Messages
2
Reaction score
0
Location
Phoenix, AZ
Wondering if anyone has seen a similar issue when attempting to connect a Hikvision DS-2DE2A404IW-DE3 to a Roku using IP Camera Viewer Pro? Once you set up the cams perfectly then attempt to discover them using the APP on the Roku, the camera corrupts and you get a perpetual "The Ports Conflict" message when doing something as simple as a save to a page with no changes made.

Once you OnVif discover the cam via IP on the APP, you're out of luck and the only way to get the camera back is to restore from a working config or a hard full reset.

Versions in the cams are the latest -V5.6.15 build 191211 from the US.Hik site and for the part the cams are bulletproof until you attempt to add them in at which point, you'll find yourself doing a restore. We also run Vivotek Vast 2 and Blue Iris as we phase away from Vast, they have had no impact on the cams once added with OnVif add.

Wondering if anyone has seen or uses this method for viewing cams on a large format tv monitor.

Thanks in advance,
ML
 

Zaai

n3wb
Joined
Apr 29, 2015
Messages
1
Reaction score
0
I know this post is old, but just to confirm I'm running into the same issue. Watching the camera on Roku using IP Camera Viewer Pro.

  • Can't update image streaming settings and quite a few settings cause the dreaded "the ports conflict" message.
  • Changing from DHCP to Static: "The device breaks down. Please contact our technical support for troubleshooting."

Firmware version is: V5.7.11 build 220905
 
Top