Hikvision camera and NVR question

coorrel

n3wb
Joined
Mar 3, 2021
Messages
1
Reaction score
0
Location
Earth
Hi,

My first time with any CCTV stuff, I have Hikvision NVR DS-7608N-E2/8P + 2 cameras DS-2CD2335-I.
Both camera were working, then I basically enabled PPPOE settings, applied settings, then disabled it. Now both cameras are not working.

From what I can gather from SADP and settings on NVR:
  • DHCP was turned off on both cameras (NVR settings had DHCP on)
  • Camera IP address is not matching the "plug and play" settings on the NVR

I guess I need to match the IP's on the camera with the settings on NVR?
Never done any of these before so, how do I setup up my camera's again?
Do I turn NVR DHCP setting on or off?
Do I change manually change IP settings on the NVR to match that of the camera or vice versa?

Any tips are hugely welcome.

Thank you.

Update: After reading about Hikvision "plug and play" features apparently all passwords needs to be the same on all cameras and the NVR. Did that and didn't really help but when changing the passwords on each camera the "Device #" was the same on both camera, changed that on each camera to a unique # and now both are displaying properly again.
 
Last edited:
Top