Foscam: Regular clicking and no video (R2M)

Joined
Apr 10, 2019
Messages
11
Reaction score
7
Location
England
I wonder if anyone can help.
I have several Foscam R2M (firmware: 2.91.2.66)

One of them has worked for a long time but has now developed a fault. It is particularly frustrating as this cam replaced another which had developed the same fault.

There is no video either through its own web interface or in BlueIris.

It starts correctly. Wipes left\right\ up\down. But even before finishing its start up routine it starts clicking, the same click as when switching from daytime to night time. It continuously clicks every 20 secs or so.

When accessing its web interface there is no video, it shows a black screen. I can access and change the settings pages.

I have reset the cam via the settings web page and using the reset button on the cam.

It just sits there and clicks at me, annoying thing! (-:
 
Top