DVR hikivision DS-7208HGHI-F1/N help me

Qualitec

n3wb
Joined
Nov 11, 2019
Messages
1
Reaction score
0
Location
Brasil
PT-BR
Bom dia pessoal, é a 1 vez que peso ajuda aqui no fórum, desconsiderem qualquer erro sou do Brasil e trabalho com assistência equipamentos CFTV.

estou com um aparelho dvr device_type=DS-7208HGHI-F1/N ele chegou totalmente inoperante não ligava após manutenção da fonte o mesmo estava com a memória flash totalmente apagada (1vez que eu peguei um caso assim) para teste copiei a memoria de outro dvr de mesmo modelo com TL866A regravei a memoria apagada e o dvr voltou a ligar e entrar no sistema porem preciso editar o ethaddr para 68:6D:BC:E7:17:35 usei o comando

setenv ethaddr 68:6D:BC:E7:17:35; saveenv

ele mostra que alterou mas após o reset o mesmo volta como estava fora isso preciso de uma ajuda de como colocar também o SN original do aparelho pois assim como o MAC o SN não é os originais vou postar também o printenv do aparelho espero que alguém com maior conhecimento possa me ajudar!


ENG
Good morning folks, this is the first time that weight helps here in the forum, disregard any mistake I'm from Brazil and I work with assistance with CCTV equipment.

I have a dvr device_type = DS-7208HGHI-F1 / N it arrived totally inoperable it did not turn on after maintenance of the source it was with the flash memory totally erased (once I took a case like this) for testing I copied the memory from another dvr of the same model with TL866A I rewrote the memory erased and the dvr turned on again and entered the system but I need to edit the ethaddr to 68: 6D: BC: E7: 17: 35 I used the command

setenv ethaddr 68: 6D: BC: E7: 17: 35; saveenv

it shows that it changed but after the reset the same back as it was outside it needs a help on how to also put the original SN of the device because just like the MAC the SN is not the originals I will also post the printenv of the device I hope someone greater knowledge can help me!



U-Boot 2010.06-svn (Apr 20 2017 - 10:23:16)[V1.4.5]

Hit ctrl+u to stop autoboot: 0

This program will upgrade software.
***
  • ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY! *
  • Don't reset machine,or anything that interrupt it. *
  • The upgrade process must finish in 10 minutes! *
  • If this program fails,machine might be unusable, *
  • and you will need to reflash again. *
  • If you find this too risky,power off machine now. *
***

Now press [u/U] key to upgrade software: b
HKVS # ls -al /devinfo
Unknown command 'ls' - try 'help'
HKVS # help
? - alias for 'help'
bootm - boot application image from memory
brush - brush a flash image to the Flash, Be Carefully.
bubt - Burn an boot image on the Boot Flash.
cpld - write cpld info to encrypt media
cramfsload- cramfsload - load binary file from a filesystem image
cramfsls- cramfsls - list files in a directory (default /)
ddr - ddr training function
erase_env- erase envirement info on flash
getinfo - print hardware information
help - print command description/usage
loadb - load binary file over serial line (kermit mode)
loady - load binary file over serial line (ymodem mode)
md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mtestall- RAM read/write test
mw - memory write (fill)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
tftp - tftp - download or upload image via network using TFTP protocol
update - Update the digicap of the device.
version - print monitor version
HKVS # setenv version
HKVS # version

U-Boot 2010.06-svn (Apr 20 2017 - 10:23:16)[V1.4.5]
HKVS # ?
? - alias for 'help'
bootm - boot application image from memory
brush - brush a flash image to the Flash, Be Carefully.
bubt - Burn an boot image on the Boot Flash.
cpld - write cpld info to encrypt media
cramfsload- cramfsload - load binary file from a filesystem image
cramfsls- cramfsls - list files in a directory (default /)
ddr - ddr training function
erase_env- erase envirement info on flash
getinfo - print hardware information
help - print command description/usage
loadb - load binary file over serial line (kermit mode)
loady - load binary file over serial line (ymodem mode)
md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mtestall- RAM read/write test
mw - memory write (fill)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
tftp - tftp - download or upload image via network using TFTP protocol
update - Update the digicap of the device.
version - print monitor version
HKVS # printenv
bootcmd=tftp 0x82000000 $(bootfile);bootm 0x82000000;
default=cramfsload 0x82000000 uImage;
sec=tftp 0x82000000 Ky2015-5-6-H352x-uImage_sec;bootm 0x82000000;
baudrate=115200
gatewayip=192.0.0.1
netmask=255.255.255.0
bootfile=uImage
device_type=DS-7208HGHI-F1/N
identification=000000010000000100000200000000440000000300000003ffffff
bootdelay=3
serverip=192.168.0.10
update_ip=192.168.1.10
ipaddr=192.168.0.100
phyaddr0=1
mdio_intf=rmii
bootargs=mem=172M console=ttyS0,115200
ethaddr=b4:a3:82:b6:cd:3e
stdin=serial
stdout=serial
stderr=serial
verify=n
ver=U-Boot 2010.06-svn (Apr 20 2017 - 10:23:16)[V1.4.5]
 
Top