Carnifex
n3wb
hi,
i am using blue iris 4.8.6.3 and can't get it to add this axis camera.
it works fine using a web browser.
under the camera configuration i am using "Axis" and "M/P/Q series H264."
when it is set to camera 1, i get "no signal."
if i choose camera 2 i get "no signal rtsp: 400 bad request."
when i use find/inspect it gives me "generic/ONVIF" with model "RTSP . . . . "
there is no video path or parameters with this method.
Opening 10.0.60.28 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
HTTP 401
Requesting device information...
Bad response
GetCapabilities...
Bad response
Opening 10.0.60.28 port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
am i not able to add this camera?
i am using blue iris 4.8.6.3 and can't get it to add this axis camera.
it works fine using a web browser.
under the camera configuration i am using "Axis" and "M/P/Q series H264."
when it is set to camera 1, i get "no signal."
if i choose camera 2 i get "no signal rtsp: 400 bad request."
when i use find/inspect it gives me "generic/ONVIF" with model "RTSP . . . . "
there is no video path or parameters with this method.
Opening 10.0.60.28 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
HTTP 401
Requesting device information...
Bad response
GetCapabilities...
Bad response
Opening 10.0.60.28 port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
am i not able to add this camera?