Amcrest PTZ not working

Joined
Jun 23, 2019
Messages
5
Reaction score
4
Location
Florida
I just added an Amrest wifi IP2M-841W-V3 to my Blue Iris installation. I cant get the PTZ controls to work in Blue Iris. They work fine from the camera's web interface. I selected Amcrest in the camera properties in Blue Iris. Any ideas? I've got a diiferent PTZ camera that works fine.
 

area651

Getting comfortable
Joined
Aug 18, 2018
Messages
471
Reaction score
411
Location
San Antonio/McAllen Texas
same cameras. Select Amcrest IP2M-843 in the model dropdown.
Right click the camera picture > Select Camera settings. From there, choose the video tab. then the configure buton the the right (beside the network IP radio button that should be selected).
On the Network IP Camera Configuration page, make sure you have Amcrest selected under MAKE and select IP2M-843,IP8M-2493/96 RTSP in the model.

Should work
 
Joined
Jun 23, 2019
Messages
5
Reaction score
4
Location
Florida
same cameras. Select Amcrest IP2M-843 in the model dropdown.
Right click the camera picture > Select Camera settings. From there, choose the video tab. then the configure buton the the right (beside the network IP radio button that should be selected).
On the Network IP Camera Configuration page, make sure you have Amcrest selected under MAKE and select IP2M-843,IP8M-2493/96 RTSP in the model.

Should work
That did it! thanks a bunch
 
Top