Search results

  1. Putimir

    SD59225U-HNI startup motor skipping

    Ok, I found locally produced (would you know it heh) stepdown transformer, I took the 50W version and so far so good, the "little piggie" is back online! Thanks again guys! Oh one more thing: the transformer has only one bracket/connector for ground/earth wire; should I connect the ground wires...
  2. Putimir

    SD59225U-HNI startup motor skipping

    Thank you for the extended explanation, unfortunately I'm not that skilled in electronics to full understand what type of transformer I need :( As said, I have used the camera for some 2+ years using POE until it did not power on anymore...first I suspected the switch and by trying out a few...
  3. Putimir

    SD59225U-HNI startup motor skipping

    Hello again, sorry to report that even with the cisco injector the camera is no longer booting up....I have now resorted to using "external" power supply, but now I have realized, that the camera has only AC24V input wires... Can the camera be safely powered using 24V DC supply? I've done a...
  4. Putimir

    SD59225U-HNI startup motor skipping

    Oh! Do you have an exact idea, which cap it is? Is it repairable by hand using hobby grade soldering station or hot air station? Disassembly on the SD59225U-HNI is quite easy and fast... Thanks
  5. Putimir

    SD59225U-HNI startup motor skipping

    Hi I have tried with 3 different sg300 switches (2 of them brand new, I thought the one that was 3 years in service with constant 50W output gave in), older cisco 3750 and a Mikrotik CRS328 ...So far, the cisco injector is keeping up, had several updates and resets, but no extensive...
  6. Putimir

    SD59225U-HNI startup motor skipping

    I have now managed to power it via POE using a cisco aironet AP POE injector...(it seems maybe the poe supply has to be more "dumb"/less negotiation)....not ideal but hey...othervise it wouldnt start on several different switches (interestingly enough, the other class4 devices have no problem...
  7. Putimir

    SD59225U-HNI startup motor skipping

    Hi looney2ns, thanks; I have to admit, no, sadly, no extra waterproofing was made, but the camera was not directly exposed to water, it was under a roofing; cabling in a aluminium pipe; the pins on the connector are spotless, nevertheless I cleaned them using contact spray and I tested with...
  8. Putimir

    SD59225U-HNI startup motor skipping

    I think the manual reboot is not the culprit, It's more likely that reboot caused the initialization of the cam, where the problem probably lies (high power demand with full speed movements)
  9. Putimir

    SD59225U-HNI startup motor skipping

    Hi, HAHA, in the meantime I did just that...yes, the camera does power on external 24v...(running parallel with POE) I even (once) managed to keep it running solely on POE (after initialized, when I accidentally disconnected external power supply). The external power is not feasible for me :(...
  10. Putimir

    SD59225U-HNI startup motor skipping

    Hi all, all of a sudden, one of my SD59225U-HNI stopped responding, and upon power cycling (POE) the dome does not do it's usual initialization ("spin around"...) but it sounds like PTZ motors are "skipping"; I can see a bit of moving (jerking) of the dome. Already tried different port, I...
  11. Putimir

    IPC-HDB4300C HTTP API - Get current alarm state

    Hi, nayr, do you have anything new on this subject? I'm currently having a support ticket open with Synology support team (i'm using Synology Surveillance Station and if I set up my Dahuas with the "supported" "native" profile, none of the alarms are picked up by the SS - it's working though if...
  12. Putimir

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    Hi, for anyone having similar problems: William from Dahua support was helpful as always, providing me with crucial bit of info: you should RESET the camera to defaults (prior) to upgrading. I did a reset and the missing options are available again! Thanks
  13. Putimir

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    Hi, I had just upgradaded my IPC-HDW5231R-Z's with dh_ipc-hx5x3x-rhea_eng_p_stream3_v2.460.0000.7.r.20170306.bin (from Dahua site) and I noticed, that IVS options are gone :( Previously I was running DH_IPC-HX5X3X-Rhea_Eng_P_Stream3_V2.460.0000.2.R.20161216.bin, IVS was enabled... Does any...
  14. Putimir

    Dahua H265 and Synology Surveillance Station

    I'm not sure what do you mean; are you using predefined Dahua profiles or ONVIF profile for you camera/s? I found out, that webui logins are separate (to which the SS logins when using predeifned profile) to the ONVIF logins, which are by default admin/admin and cannot be changed via webui, but...
  15. Putimir

    Dahua H265 and Synology Surveillance Station

    Hi, yes, I have some experience and here are my findings (please correct me if I'm wrong) 1. ONVIF Profile S does not support H.265 (source: IPVM.com, however there is some new info for the 2.6.1 version - https://www.onvif.org/specs/rl/ONVIF_SpecSet_RL_2.6.1.pdf) 2. Dahua HEVC streams with...
  16. Putimir

    trouble with webplugin.exe in Firefox & Chrome, but works in IE

    Nayr thanks, yeah, you've got a point but SmartPSS is "alot of software" and I'm still deciding what to use, currently I've done more testing on my Synology SS, and it's a bit annoying ant time consuming to get to know all the new :D Two more things that popped to my mind right now; one I've...
  17. Putimir

    trouble with webplugin.exe in Firefox & Chrome, but works in IE

    Hi, regarding webplugin.exe: I have a couple different types of Dahuas, both SD & IPC, with different FW versions (it looks every FW carries different version of webplugin.exe). The problem I'm facing is, one version of installed plugin works only with particular FW. So I want to manage...
  18. Putimir

    Dahua Enable Telnet

    Hi, since the newer firmware versions removed telnet support, can anyone point me into right direction on how to "pull" the running FW that, let's say the camera is shipped with...? Thanks!
  19. Putimir

    SD59430U-HNI Autotracking setting.

    Hi everyone! I just got a DH-SD59225U-HNI and I have trouble customizing the autotracking settings: 1. I would like to customize the track time - no matter what I put into the "track time" input box, the camera tracks the object for a few seconds and then returns to preset 2. I would like to...
Top