Search results

  1. C

    Hikvision DS-7616NI-E2/16P upgrade

    Thanks. Can I just load the latest version, or do I have to install all the versions listed since my version? The NVR was purchased in Thailand at a retail store.
  2. C

    Hikvision DS-7616NI-E2/16P upgrade

    Thanks! I arrived at DOWNLOAD EU PORTAL and I see about 20 upgrades. Can I just jump to the latest version V.22.005 build 191208 or do I have to install each and every upgrade in order since build currently installed?
  3. C

    Hikvision DS-7616NI-E2/16P upgrade

    I have a DS-7616NI/E2/16P NVR running firmware V3.4.62, build 160503. Where could I get the latest stable firmware?
  4. C

    Hikvision DS-7616NI-SE/P QNAP TS-251 and Asus RT-AC68U router. NVR theft.

    Several cams do have SDcards but sometimes the cams are also stolen. Cams are POE so once their cable is disconnected, power is lost. It seems like there is more than one guy, maybe a team, that hit the premises - 1 or 2 guys get the nvr and cams, another 1 or 2 go through the premises and get...
  5. C

    Hikvision DS-7616NI-SE/P QNAP TS-251 and Asus RT-AC68U router. NVR theft.

    So the the TS431+ is good for 7 or 8 3mp cams running at max. resolution technically?
  6. C

    Hikvision DS-7616NI-SE/P QNAP TS-251 and Asus RT-AC68U router. NVR theft.

    Putting a thick bracket on it, it's ok for an hour. But the NVR and HD can be destroyed with a hammer in a minute and that means all video is lost.
  7. C

    Hikvision DS-7616NI-SE/P QNAP TS-251 and Asus RT-AC68U router. NVR theft.

    Which model of QNAP box would you recommend for 7 or 8 hikvision 3mp cams running at 1080p? What models do you have? QNAP website recommended a TS-253 pro or a TS251 maybe a TS251+ or a TS251-4g
  8. C

    Hikvision DS-7616NI-SE/P QNAP TS-251 and Asus RT-AC68U router. NVR theft.

    Currently, the cams are all POE powered and all are connected to the NVR POE ports. I don't currently back-up important computer based files. Cost is not the primary consideration. I'm more interested in getting a robust, reliable, secure easy to use system in place, one where there is a...
  9. C

    Hikvision DS-7616NI-SE/P QNAP TS-251 and Asus RT-AC68U router. NVR theft.

    There have been several break-ins into houses in the neighbourhood that had cameras and NVRs but the thieves also stole the NVRs, so no video, and they also cut TV cable and phone service cables! Currently, I have 7 hikvision 3mp (ds-2cd2132-i or similar) cameras running into a DS-7616NI-SE/P...
  10. C

    iVMS 4200 v2.4.0.6 No fast forward

    I was able to get ivms-4200 into fast forward. 1. Assign the NVR to a new IP address. 2. When installing Ivms, reply yes to all of the requests to open holes in the windows firewall, for cgi/fastcgs. nginx.exe, ivms-4200, streamserverapp.
  11. C

    Best Current Firmware for Hikvision NVR DS-7616NI-SE/P ?

    For Hikvision NVRs DS-7616NI-SE/P and DS-7608NI-SE/P with FW v2.3.7 build 131112, which current firmware version is best? One NVR came in a red and white retail box (purchased in Thailand) and the other came from China in a brown box. In Hikvision Europe there is V3.0.10 build 141125 – is that...
  12. C

    iVMS 4200 v2.4.0.6 No fast forward

    I have installed IVMS 4200 v2.4.0.6 from hikvision europe, onto windows 8.1. I'm unable to get the playback for any camera to go fast, at 2x, 4x, or 8x. I use a hikvision NVR DS-7616NI SE(p). Anybody know how to get the fast forward going?
  13. C

    Hikvision DS-7616NI-SE/P - HDMI resolution options

    The NVR video output via the HDMI output port can be set in the NVR. All NVR resolutions currently specify 60hz and I'd like to see the 50hz. options. Anybody know how to see/get the 50hz. options?
  14. C

    Hikvision DS-7616NI-SE/P - HDMI resolution options

    In a hikvision DS-7616NI-SE/P firmware v2.3.7 build 13112 NVR, in the configuration menu, general tab, I see only resolutions all with 60hz, like 1024*768/60hz. Is it possible to get the resolutions for 50hz.?
  15. C

    Hikvision DS-7616NI-SE/P Firmware Update

    I see from post #5 fromalastairstevenson that his camera IP addresses are in the 192.168.254.xx range so they seem to be on the NVR subnet. But post #7 by DaveP recommends that camera gateway should be 192.168.0.254, so the cameras would get addresses in the 192.168.0.xxx range and be on the...
  16. C

    Hikvision DS-7616NI-SE/P Firmware Update

    For 1 - I put one cable from the WAN port on the NVR into the switch, one cable from the router to the switch, and one cable from a camera port on the NVR to the switch. Once the second cable from the NVR is attached to the switch, the router freezes - no access to the router. If either cable...
  17. C

    Hikvision DS-7616NI-SE/P Firmware Update

    Some of my current concerns are: 1. Through all 3 interfaces into the NVR: directly using the mouse and a TV, by PC using the web interface and by using Ivms-4200 client; for all cameras, I do not see all of the features and functions of a camera. To see, or change all features of a camera, I...
  18. C

    Hikvision DS-7616NI-SE/P Firmware Update

    I am about to do a firmware update a Hikvision DS-7616NI-SE/P by going to the NVR by HTTP from a local LAN PC, going into the maintenance menu, upgrade, and specifying a drive on the PC containing the contents of NVR_(76-SE,V,VP)BL_EN_STD_V3.0.10_141125.zip Any known issues or concerns?
  19. C

    DS-7616NI-SE/p No Resources

    I have 6 cameras, all 3mp, various Hikvision models, on a hikvision DS-7616NI-SE/p NVR. When in "live view" directly from the NVR, to a TV using the HDMI cable, some of the cameras show "no resource" when all cameras are being viewed simultaneously. Every camera is working and recording...
  20. C

    DS-2CD2132F-IWS lens..?

    I'd recommend the 4mm. The 2.8 mm is good only for objects less than 20 feet.
  21. C

    Can the lens be changed on DS-2CD2032-I ?

    Can the lens be changed on DS-2CD2032-I ? or on DS-2CD2132-I ? what is the lens mount type?
  22. C

    Hikvision with Synology - camera motion detection settings (DS-2CD2012-I)

    That doesn't look right. On the arming schedule, the dates and times that you want motion detection need to be green.
  23. C

    Recommended bigger POE switches? 16-24 ports or so?

    How is this switch working for you? Any issues?
Top