Search results

  1. B

    Inexpensive paint sprayer recommendations

    Really appreciate the response. Thanks again!
  2. B

    Inexpensive paint sprayer recommendations

    I've painting some cams to match the color of my house and while I can prime them with spray primer, I need a sprayer to use the custom paint. Timingwise, I don't have time to send a paint sample to have someone make custom spray cans, but I'm looking for a cheap sprayer that can do the job...
  3. B

    Reappearing DMSS push notifications

    Anyone else's DMSS push notifications reappear today after inexplicably disappearing for the last 10 days? I have Dahua cams (bought from Andy) in two separate locations and experienced this and just curious if it was a Dahua server issue.
  4. B

    Dual router blues

    Really appreciate the response. The Orbi has an "AP' mode setting that I think would accomplish what you describe,though I'll need to wait until I'm physically on site to test it since I'm doing this remotely,which is why I'm hoping for a port forwarding type solution.
  5. B

    Dual router blues

    Yeah, that's the one. Not much info in there, though. Please let me know if/when you find success with your setup and how you did it!
  6. B

    Dual router blues

    Yep, that's my set up exactly with the same LAN ip addresses. Did you get yours working?
  7. B

    Dual router blues

    In my area Quantum fiber is now servicing fiber for CenturyLink customers. They aren't charging anything for the CenturyLink modem/router, however, so I assumed the router had something to do with differentiating the legacy customers served by CenturyLink and the new Quantum customers, but that...
  8. B

    Dual router blues

    CenturyLink router is this one: Axon (Greenwave) C4000. It actually has a decent interface with lots of options, port forwarding and NAT disabling among them. My Orbi is RB750,which also has a lot of interface options.
  9. B

    Dual router blues

    The Orbi router was my primary router from which my Blue Iris server and all wifi devices were set up. It was great because the ethernet cable from the ONT went right to the Orbi. With the CenturyLink service change, the ONT must now connect to the CenturyLink router and the Orbi plugs into a...
  10. B

    Dual router blues

    The CenturyLink router has an option to disable the NAT in its configuration interface. I'm trying to do this remotely, through, and when I tried disabling that yesterday my system went offline and I had to have someone physically go to the computer and enable it again.
  11. B

    Dual router blues

    My new ISP (Quantum Fiber/CenturyLink) recently did a new install on my home and now, unlike prior CenturyLink fiber setups, the ONT now has to go through a CenturyLink router before getting to my Orbi router in order for me to get Internet access. There is no way around this as I've tested with...
  12. B

    Comment by 'Billyjack5' in media 'Double-NAT configuration for Blue Iris remote access'

    Appreciate the response, bp2008. I'm still a bit stuck. The IP address of the Orbi router 192.168.1.1 and the "Internet Port"--also referred to as the "external IP address" in an Orbi configuration menu, is 192.168.0.4. In the CenturyLink router I've forwarded external port 8000 to...
  13. B

    Comment by 'Billyjack5' in media 'Double-NAT configuration for Blue Iris remote access'

    I acknowledge in advance that there is a simple answer to this question, but here goes: Due to a new fiber service in my area, my primary router (an Orbi752) is now behind a second router, which is a newer CenturyLink router (no way around this dual setup). So I've got the dual router setup per...
  14. B

    Dahua wireless series

    Thanks, that's helpful. There's a 12v power source at the existing location and I'd like to run a powerline adapter with an injector but the cat5e will just be too aesthetically intrusive for this application, hence my desire to use the 12v cable as a power source which is very well hidden. The...
  15. B

    Dahua wireless series

    Does anyone have any hands-on experience with either of these Dahua wifi cameras? Wireless Series I'm well aware that wifi cams should be avoided if at all possible but for this particular application I don't believe any other option exists. I will be covering a smallish area (20x30 feet)...
  16. B

    Review: IPC-LPR237B-IR / Equivalent of Dahua ITC237-PW6M-IRLZF1050-B - ANPR, Traffic & Access Control Camera

    Any improvement in the vehicle make and type fields?
  17. B

    Review: IPC-LPR237B-IR / Equivalent of Dahua ITC237-PW6M-IRLZF1050-B - ANPR, Traffic & Access Control Camera

    Well, that's disheartening to hear. Does the new firmware make any improvements at all?
  18. B

    2022 Latest New Dual-Channel Camera

    I assume I have the US firmware that came pre-installed when I bought it from Andy. The plate recognition is great, it's just the vehicle type and description that's lacking. There's a newer firmware version that Wildcat_1 is testing that I'm waiting to hear about. Unless what came pre-installed...
  19. B

    2022 Latest New Dual-Channel Camera

    Just watching the footage, the metadata vehicle description info appears much more accurate than my ITC237, but then again, I assume the footage was taken in Hong Kong where the algorithm was tested, hence the accuracy. My 2021-07-19 firmware pulls a lot of Tatamotors and Daihatsu vehicle...
  20. B

    Review: IPC-LPR237B-IR / Equivalent of Dahua ITC237-PW6M-IRLZF1050-B - ANPR, Traffic & Access Control Camera

    Thanks, Wildcat_1. Would be interested in knowing if the vehicle description info is any more accurate in this version. I get a whole lot of Daihatsu and Tatamotors on the 2021-7-19 firmware I'm running.
  21. B

    Does the Amcrest AD410 take 24V DC?

    Apologies. I meant to communicate that my AD410 is hardwired to a 24V AC transformer.
  22. B

    Does the Amcrest AD410 take 24V DC?

    Mine is connected to a 24V transformer and it works fine.
  23. B

    Public Urinators

    What a great thread title!
  24. B

    Review: IPC-LPR237B-IR / Equivalent of Dahua ITC237-PW6M-IRLZF1050-B - ANPR, Traffic & Access Control Camera

    How is the new firmware working for you? I see that you are now on the 2021-07-19 version.
  25. B

    Bosch IR illuminator

    I figured you'd ask. For this project I'm using the 2mp 25x positioning camera, PTZ1A225-HNR-XA.
  26. B

    Bosch IR illuminator

    You're probably, though I suspect the Axon illuminators are a few notches above as I've spoken to Doug there (as others here have) and he's explained how they manufacture them and the conditions that they test them under. I'd sure like to find something cheaper, though.
  27. B

    Bosch IR illuminator

    I am wondering if anyone has tried Bosch IR illuminators, specifically this one: https://resources-boschsecurity-cdn.azureedge.net/public/documents/IP_IR_Illuminator_50_Data_sheet_enUS_26632806155.pdf While about twice the cost of a comparable Axon, this model allows for adjustment of the IR...
  28. B

    Review: IPC-LPR237B-IR / Equivalent of Dahua ITC237-PW6M-IRLZF1050-B - ANPR, Traffic & Access Control Camera

    I'm running this camera with a capture point of 87 feet and about a 30 degree angle and while I get decent captures, I'm maxed out at the zoom the pixel per plate are less than recommended. At 110 feet I don't believe there would be enough zoom and that angle would be too extreme.
  29. B

    PTZ illuminator and soft focus issues

    While were are on the topic of APIs for PTZs, is there a comparable API that will switch the PTZ into day or night mode? I'd prefer to do it through Blue Iris so that I can set the switch relative to sunrise and sunset, as opposed to keep having to adjust the schedule function. What I'm seeing...
Top