Search results

  1. ccutrer

    No TLS for MQTT?

    Mosquitto, but due to other loads it handles, TLS and auth is required.
  2. ccutrer

    No TLS for MQTT?

    Right. My broker requires TLS though.
  3. ccutrer

    No TLS for MQTT?

    I'm running BI 5.3.1.5, and when I go to configure an MQTT broker, the Auth TLS option is disabled no matter what I do: Screen Shot 2020-08-08 at 10.39.24 AM.png Am I missing something, or is this just not supported yet? Additionally, if I press test in this configuration, the log will start...
  4. ccutrer

    Blue Iris UI3

    Which is really confusing. I have two different groups with 10 cams each. One group BI decides to display 8 small, and 2 large. The other group has 6 medium, and 4 small. 19 of the 20 cams are identical, and the 1 outlier has the same aspect ratio. I just shrug and move on.
  5. ccutrer

    Blue Iris UI3

    Ohhhhh, I bet I know. I lost a minute or two when Blue Iris restarted after updating. I'll check later today when the clips have rolled over a few time. Right now it seems like I'm missing timestamps on one of the last two clips for each camera (not necessarily the currently recording one).
  6. ccutrer

    Blue Iris UI3

    Nice. I didn't even know you had implemented this. I updated my Blue Iris this morning, and can confirm that I get timestamps on the timeline for historical clips now (but not the currently recording one, which makes sense given how you're detecting if you should add them). Thanks!!!!
  7. ccutrer

    Blue Iris UI3

    Per browser. I have to set it for each browser I log in with, even using the same user.
  8. ccutrer

    Blue Iris UI3

    Ooooohhhhhhh!
  9. ccutrer

    Blue Iris UI3

    I'm not sure what this has to do with anything. UI3 is presenting my list of clips to me, with the length of each clip, and the start timestamp of that clip (see screenshot 1). Once I click that clip, it loads up and starts playing. The scrubber at the bottom now shows my current offset into the...
  10. ccutrer

    Blue Iris UI3

    I have my cameras record continuously. Is it possibly to have the scrubber on the clips viewer show the actual timestamps, rather than offset into that clip? My clips don't always roll over on perfect 4 hour intervals, so it can be difficult to add in my head where a specific time is if I get an...
  11. ccutrer

    Beginner: Connect DoorBird into Blue Iris

    Yes, I have 3 chimes. I have a CAT6a shielded home run to my network area that provides power and data, and then a CAT5 to a two-gang box where the main floor chime is, and a transformer. The doorbird is mounted to a standard single gang electrical box to give me plenty of room for wiring...
  12. ccutrer

    Beginner: Connect DoorBird into Blue Iris

    Yep, this totally fixed it for me. Now I get 1280x720 instead of 640x480.
  13. ccutrer

    Mic not working on DS-2CD2142FWD-IS

    I'm using a passive mic (xbox 360 headset - I just rip the mic off), so I don't have a PoE splitter. PoE connects straight to the camera, and the mic connects straight to the camera.
  14. ccutrer

    Mic not working on DS-2CD2142FWD-IS

    "Hey, you made all those connections, did you actually turn it on?" Thank you so much, that was definitely it!
  15. ccutrer

    Mic not working on DS-2CD2142FWD-IS

    I have a DS-2CD2142FWD-IS, full English version, running firmware V5.5.0 build 170725, connected to Blue Iris. For the life of me, I can't get a microphone working. I've tried both the Xbox 360 headset, and then "upgraded" to https://www.amazon.com/gp/product/B004REA7MG (with a PoE splitter)...
Top