Search results

  1. H

    US Presidential Election 2020 (& Politics) :)

    You couldn't be more wrong, though your literacy analysis was correct, I do prefer to read words rather than blank spaces. Call me old fashioned. Please try to not spread fake news, no Police Officers were killed at the Capitol.
  2. H

    US Presidential Election 2020 (& Politics) :)

    Generally, I assume being banned/suspended from Twitter as a positive credibility indicator :rofl: Facts that cannot be countered, must be silenced...or something like that!
  3. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Pulling the data into Home Assistant using IOTlink and Open Hardware Monitor.
  4. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    @wittaj Rain and wind last night on 5/7 cams almost continuously triggering on an i5-6500. Hovering around 77% for a few hours with 83% peak usage. Each cam is only sending a couple of images / 1 sec intervals. Below are 24hr stats of that server. Right up until BI crashed this evening with...
  5. H

    Newbie in UK here. New home setup, POE and PTZ issues.

    What is your IP config for your main network, NVR and cam? Have you set a static IP on the cam gui?
  6. H

    Bullets or turrets for new cameras?

    The IR LED's are just part of the problem. The main issue is the overall form factor, especially the lens hood. Not being a flat surface makes it easy for the cobwebs to form. I have several 'modern' Hikvision bullets -i5 & -i8 variants and they all suffer with cobwebs frequently forming. In...
  7. H

    Bullets or turrets for new cameras?

    As above, go for Turrets. You'll be spending your life wiping cobwebs off the bullets.
  8. H

    5.4.4.0 update - new triggered+continuous record setting

    Double check both your main-stream and sub-stream are using the same compression settings i.e both h.264 or h.265. I had the same problem on one of my cams whereby it would trigger and then stop after a few seconds, failing to switch to the main stream. On the wild hunt for a reason, I realised...
  9. H

    Change Blue Iris profile with my voice

    I have BI integrated into Home Assistant whereby I can control profiles with voice using Alexa and Siri. What are your plans?
  10. H

    Live feed video updates every 2 second. How do I fix this?

    Reset to factory settings and start again, making incremental changes to see what exactly is causing the issue.
  11. H

    Blue Iris UI3

    You are not able to specify which cameras Auto Maximize. UI3 will maximize any camera that is triggered or detecting motion.
  12. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    DeepStack will analyse anything within your defined Zones. The only way would be to clear (mask out) the zone where your neighbours car is parked.
  13. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Try a different port e.g 82
  14. H

    Webserver not working on rebuild

    Perhaps obvious but is the gateway in your [host machine] network settings correctly pointed to your router? (eg 192.168.1.1) I'm assuming no VLANs setup etc? Have you tested other ports?
  15. H

    Blue Iris UI3

    Been there, done that! Glad you found the problem :)
  16. H

    Blue Iris UI3

    Try creating a test group with a couple of cameras, enable group webcasting and see if you experience the same issue.
  17. H

    Blue Iris UI3

    Is this the default All Cameras group or another group you have created? Webcast settings are per group.
  18. H

    Blue Iris UI3

    Should be just a change within your webcasting settings (Page 58 in the Help File .pdf): Default max FPS
  19. H

    Hello! New swedish member here :-)

    Welcome to the rabbit hole :welcome:
  20. H

    Controlling an internal CCTV to only record/stream when required

    Yes that makes sense - POE will definitely make for a tidier install. Thinking out loud - I suppose you could just use a controllable socket and have the POE injector plugged into that in the AV cabinet. Unless you've got rock solid wifi, consider something like Quinetic switches (Quinetic...
  21. H

    Controlling an internal CCTV to only record/stream when required

    Do you have power local to the camera? I think the easiest method would be to power the camera with 12V power supply into a standard socket and then end-users can simply toggle the socket. Alternatively you could spur off any mains circuit and have a dedicated 'light switch' labeled "stream...
  22. H

    Blue Iris UI3

    As far as I know this hasn't been implemented in BI yet. Auto-Cycle still 'triggers' from any motion trigger, pre-deepstack. At least in my testing but would be happy to learn otherwise!
  23. H

    Motion Detection in 5.4.3.1 what was changed constant triggers?

    I believe the sensitivity has been increased/improved - I had a similar problem with one camera that I simply lowered the sensitivity settings (Object size/contrast) to combat the change.
  24. H

    UI3 - cycle Current Group besides "All Cameras"?

    You need to enable group webcast in the group settings then "enable camera auto-cycle stream".
  25. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    You're not the only one, myself included :D https://docs.deepstack.cc/windows/
  26. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Have you downloaded Deepstack already? Unknown faces (if detected) will be stored in the folder you have selected in the settings.
  27. H

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Only confirmed/cancelled by Deepstack. I would imagine filtering may come fairly soon, as it's a logical improvement to this new implementation.
  28. H

    Shooting Range recorded clips skipping a lot of the action. Live video looks just fine.

    Personally, I'd be recording continuously and not relying on motion detection.
  29. H

    No Image in IOS Push Notifications

    Yes it's fairly easy and there are multiple tools/services available to generate them. As long as your home internet connection is decent I haven't seen this being a problem but it is not applicable to everyone. Per-app VPN would obviously be a great addition that would eliminate most issues...
  30. H

    iOS WAN Connection Issue

    Connecting via WAN just fine on 5.4.1.1 / 2.00.36. How are you accessing your BI install over WAN?
Top