Search results

Successfully updated to this FW: http://ftp.hikvision.ru/01.%20Firmware/01.%20Hikvision/02.%20NVR%20%28IP%20regs%29/01.%20K%20series/DS-76XXNI-K1%28B%29/ Before: After: All information is here (note the JST pinout is reversed) Hikvision - Clearing Passwords and/or Loading Firmware via TTL...

DMSS worked!

The spec says 43.3 mm (Type 2.7)

My own experience was bad. I also saw other people here saying Andy screwed them over. BTW. This particular model is sold by authorized dealers for $200, with legit warranty and support, Andy sells it for $230 if I remember right. So what's the point?

That's because you got it from Andy who sells gray market, probably no logo too. Who knows if the quality if the same and obviously no warranty or support.

Not yet, waiting for a JST ZH 1.5mm 4Pin connector to arrive so I dont have to solder to the board

I doubt it's Dahua OEM.

reset to factory defaults

Darkness: Leds Auto:

It will turn on the leds when in darkness. I did not test it yet

leds off. I think it was in auto but it was bright enough for the cam.

the only way I know of is lower the exposure time, which can be probably set to 1/60

Also worth noting that UK distributor claimed there is a FW update coming that will enable deterrent function (will turn on LEDS on event)

here you go I set exposure to 1/30 second clip is with wdr on 3rd is dahua (also limited to 33.33ms) a phone photo just to demonstrate the light level

I have two clips recorded, will upload to youtube

I'd say it's just a 4k version of 5442 here are a few shots to compare note that I was holding the hik camera in my hands and the jpegs from hik camera are more compressed 5442: (with some manual exposure setting I did to reduce ghosting) 2087g2 (normal: Exposure Time 1/12) 2087g2 (low...

Recording to SD card works just fine, I think it's an issue with the Dahua NVR or something else. I'll also try to record to network share and Synology NAS later

https://www.aliexpress.com/item/1005001742715897.html I think the price they ask right now ($250) is too high, I purchased for a bit less and someone mentioned above the authorized dealer price is much lower, at least in UK

Tried to hook it up to my Dahua NVR and it doesn't work quite right. The recording has lots of skipped frames, like if the network bandwidth was not enough. I maxed out all the settings though. Will try to record on internal SD instead

Aliexpress, hikvision branded version. NOT ANDY of course

I can try to get it next to Dahua 5442

Received my camera today. Nighttime quality is quite impressive.

yes I see the list, but it's kind of too long hence my post here, maybe someone already compared prices

you have to use DH_NVR4XXX-4KS2 FW here is the latest one https://dahuawiki.com/images/Files/Firmware/DH_NVR4XXX-4KS2_MultiLang_V4.001.0000005.1.R.201126.bin

He sells unbranded no-logo cameras. And he's not in this list: Authorized Distributors And I would NOT recommend him I'm selling my Dahua setup I bought from him. None of the issues I reported were resolved and some of the questions he simply ignores.

?

Where exactly? can you share the link Do they ship to US?

That VPN icon is just Blokada ad blocking, I was connected to internal network via Wi-Fi. But I'll try to disable the ad blocking and see if it changes anything. Does this look like your NVR settings? Do I need to configure anything on the cameras?

NVR. I tried to play with snapshot settings but was not able to make it work. Can you please share your settings?

What is the sensor used in new hikvision cams with 1/1.2"?