IPC-T5442T-ZE IPC-T5442TM-AS IPC-T5842T-ZE SMD 3.0 Smart IR Latest New Firmware From EmpireTech

Joined
Mar 7, 2019
Messages
361
Reaction score
881
Location
Missouri
Did you log back in to the camera after a factory default to clear the two start up messages? Don’t remember if I did that when I updated my 5231’s. Things just seem to work better for me in a private browsing session on whatever browser I’m using with my mix of Lorex and Andy cams with a newer Andy 5232 NVR
 

slidermike

Getting the hang of it
Joined
Aug 4, 2022
Messages
45
Reaction score
54
Location
USA
Hello, I am new to the forums. I just received my first
IPC-T5442TM-AS
from Andy.
Since its coming out of the box I would like to make sure it is on the current/latest stable release firmware.
My issue is locating where to download the files from and where is a list of revisions?

I am sure the info is available but due to my being new and pecking through the many pages I am the issue. I have tried googling but that just led me to this thread of 27 pages. The first post is where I would have expected such info but it looks to be not the case.

Thank you
Mike
 

amdpowered

Getting the hang of it
Joined
Apr 25, 2020
Messages
64
Reaction score
48
Location
USA
Hello, I am new to the forums. I just received my first
IPC-T5442TM-AS
from Andy.
Since its coming out of the box I would like to make sure it is on the current/latest stable release firmware.
My issue is locating where to download the files from and where is a list of revisions?

I am sure the info is available but due to my being new and pecking through the many pages I am the issue. I have tried googling but that just led me to this thread of 27 pages. The first post is where I would have expected such info but it looks to be not the case.

Thank you
Mike
First page. First post.
 

Timokreon

Getting comfortable
Joined
Feb 25, 2022
Messages
595
Reaction score
1,065
Location
Chicago
Thank you sir. I do not see that despite the original post being made in 2021 (noted at the top), that at the bottom right it says modified in 2022.
It's a bit confusing, but that file in the first post is the latest so far. Feb 2022.
 

105437

BIT Beta Team
Joined
Jun 8, 2015
Messages
1,998
Reaction score
884
20220817 Smart IR fw is ready, welcome to ask for testing.
Andy, I'm currently running V2.840.15OG008.0.R, Build Date: 2022-02-18. I see this new version offers Smart IR, what others changes are in the release notes? I'd be willing to help test this version for you.
 

amdpowered

Getting the hang of it
Joined
Apr 25, 2020
Messages
64
Reaction score
48
Location
USA
Loaded 8 5442-ZEs. No known issues / differences from what I can tell. My IVS rules seem to function the same.
 

David L

IPCT Contributor
Joined
Aug 2, 2019
Messages
7,933
Reaction score
20,759
Location
USA
So is everyone still Resetting to Factory Default after upgrade?

From Cliff Notes:

Dahua Firmware Updates
Before installing firmware, it is suggested to thoroughly research any potential compatibility problems or issues. Dahua started signing their firmware in 2017 (varies by model), which prevents installation of older, non-signed versions. If you are unable to install older firmware, or inadvertently brick your camera while upgrading, see the Dahua Camera Firmware Rollback / Brick Recovery section.

Before applying a firmware update, save the camera configuration so it can be reloaded later. After applying a firmware update, you must factory default (reset) the camera in the Web UI (Setup > System > Default). This post-firmware upgrade default process has fixed various issues; you have been warned.

Since the camera will revert to the default settings (including the network configuration), reconnecting to the camera may be problematic. The default fixed IP address for Dahua cameras is 192.168.1.108, which may cause the following issues: IP conflicts if this address has already been assigned by the router, or an inability to reach the camera if you have a subnet that is not 192.168.1.X. Using the Dahua ConfigTool should mitigate either of the above scenarios. See the section below on Dahua Camera Viewing / Management Options - Desktop Computer. Once you have reset the camera network configuration (Setup > Network > TCP/IP), reload the saved camera configuration.
 

amdpowered

Getting the hang of it
Joined
Apr 25, 2020
Messages
64
Reaction score
48
Location
USA
Hey guys,

The Smart IR firmware with SMD 3.0 V2.8 2022 Aug Version has been released. The update is mainly for Smart IR, New Security Baseline function, highly recommend to update, esp the 4K models.
Thanks for your updating.

Andy
Was there a change from the beta, General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.840.15OG00D.0.R.220817.bin?
 
Top