EZVIZ DB1, just LEDs around camera, button does not light up.

Joined
Feb 13, 2021
Messages
6
Reaction score
0
Location
Ireland
Hello,

I have a new EZVIZ DB1. I'm connecting it directly to via fuse provided to a 12v AC transformer but the thing is not operating as expected.

Two leds around the camera light up but nothing else. The bell button does not light up. The EZVIZ DB1 unit makes a buzzing sound :-(

Has anyone seen this before? Or have any suggestions?

ezvizdb1.jpg
 

andycots

Getting the hang of it
Joined
Feb 21, 2015
Messages
172
Reaction score
81
Location
West Yorkshire, UK
This should get you through a lot of problems, first being power supply.

 
Joined
Feb 13, 2021
Messages
6
Reaction score
0
Location
Ireland
Hey,
Thanks for that, I'll get reading.

I took out the old transformer and put in a new fuseboard mounted 8-24v AC. I set it to 12v. And now I have red ring flashing 'device exception.

DT
 
Joined
Feb 13, 2021
Messages
6
Reaction score
0
Location
Ireland
I went to two electrical suppliers today (Ireland) and was told in both that 8 - 24v AC 8VA is the most powerful fuseboard mountable bell transformer available
 
Joined
Feb 13, 2021
Messages
6
Reaction score
0
Location
Ireland
I put in the new 8 - 24v AC 8VA set to 12v and 24v. The EZVIZ DB1 now powers to the blinking red main button. Holding reset does nothing. I think I have dud unit.
 

iwanttosee

Pulling my weight
Joined
Dec 27, 2020
Messages
203
Reaction score
186
Location
US
I went to two electrical suppliers today (Ireland) and was told in both that 8 - 24v AC 8VA is the most powerful fuseboard mountable bell transformer available
Maybe in Ireland? I got a 16vac 40va for $15 USD on eBay.
 
Joined
Feb 13, 2021
Messages
6
Reaction score
0
Location
Ireland
Any opinons

15av

Or 40?
 
Top