- Feb 6, 2018
- 22
- 2
I just got a new IPC-T54IR-ZE from EmpireTech that I was going to attempt to read plates with but I'm not sure it will be possible. What do you think? Is this a camera issue or a settings issue? I realize the field of view is very wide even with the camera zoomed all the way in.
Should I attempt to mess with settings more or just give up and try a different camera with more zoom? I was attempting this camera because I was worried a bullet camera wouldn't look very good compared to the turret.
This is a daytime image attached
My settings:
Anti-flicker: Outdoor
Shutter: 1/100000
Gain: 10-20
Exposure comp: 0
Auto Iris: on
3D NR: on
3D NR Level: 50
2D NR level: 50
backlight: off
Style: Standard
Brightness: 50
Contrast: 100
Saturation: 50
Sharpness: 50
Gamma: 100
WB: Auto
Day/Night: B/W
Defog: off
Ai SSA: Off
Should I attempt to mess with settings more or just give up and try a different camera with more zoom? I was attempting this camera because I was worried a bullet camera wouldn't look very good compared to the turret.
This is a daytime image attached
My settings:
Anti-flicker: Outdoor
Shutter: 1/100000
Gain: 10-20
Exposure comp: 0
Auto Iris: on
3D NR: on
3D NR Level: 50
2D NR level: 50
backlight: off
Style: Standard
Brightness: 50
Contrast: 100
Saturation: 50
Sharpness: 50
Gamma: 100
WB: Auto
Day/Night: B/W
Defog: off
Ai SSA: Off