Hikvision FIRMWARE TOOLS - change language, extract files and create own firmware

[lepa]

Hi. I need to change some files in the firmware of this camera iDS-2VS435-F840-EY(T5) (firmware iDS-2VS435-F840-EY(T5) ). I used the hickpack utility, but the output is archives of an unknown format (maybe they are encrypted). Can you help figure out how to unpack, change and pack the firmware for this camera. Thank you.

 

[tregubovdu]

Hello!
Can anyone help repack the new intercom firmware? The one posted by Ivan cannot change my version. It appears to be downgrade protection.
I updated to the version from 07/07/2023. Got Chinese.

 

[alibeg]

I just installed doorbell DS-KV8213-WME1 (firmware V2.1.5 build 200629). Is there a chance this device to speak croatian?

 

[khbadeyan]

Hello everyone, I've got a ds-kh9510 indoor intercom display from China, and am lost in info whether it's possible to "turn it" English or not. Any help is appreciated.
edit: turns out patching ds-kh9510 is as easy as it can get. however now I've got an issue with ds-kh6530-c1

 

[jackding]

2df5220s-d4/w
Access Error: 404 -- Not Found
firmware language mismatch: /home/webLib

 

[Rinat]

Hello!
I have bought two cameras: one ot it hikvision DS-IPC-K34H-LT from China
V5.7.12 build 230614
V7.3 build 230510

The interface is on Chineese.
I could not connect it to IVMS-4200.
Is it possible to downgrade or upgrade a firmware to improve it?
I appreciate if somebody could resolve my problem?

 

[alastairstevenson]

That firmware blocks any attempt to downgrade the version from that currently installed.
Even if a downgrade was possible, it would not change the fact that the camera is stamped internally as a Chinese device.

 

[Rinat]

Шер there any way to use this cam?

 

[alastairstevenson]

Suggestion: return them and request the vendor supply EN versions.

 

[Rinat]

Thank you for suggestion. It is impossible. They don't have an international versions. And it is impossible to return it.

 

[cestrickers]

Hi Folks, as many here I didn't realise until after that cameras bought elsewhere would have firmware update issues. The serial number doesn't have the Chinese code but does have AAWRAX(XXXXXXX) at the end. The supplier has sent a Hiktool.exe file that is different from what I've seen here but requires the camera to be directly connected to a PC which is less than ideal for obvious reasons. Anything I need to know about that serial number before I start experimenting?

 

[alastairstevenson]

I didn't realise until after that cameras bought elsewhere would have firmware update issues.

What's the brand and model number of the cameras?
Where did you purchase them from?
What's the firmware version of the cameras?
What issues have you seen so far?

 

[cestrickers]

Hikvision DS-2CD2187G2H-LISU
Hong Kong
V5.7.14
No issue, planning for the future.

Thanks.

 

[centrino]

Hikvision DS-2CD2187G2H-LISU
Hong Kong
V5.7.14

I ended up being into the same situation where I bought a 2387G2H-LISU from taobao.com. The unit S/N contains AAWRAY.

How did you resolve it?

 

[havran]

Hello, I have a HWI-B120H-D/W brick camera
what firmware should i use? I couldn't find the correct firmware for this model anywhere.

 

[alastairstevenson]

I couldn't find the correct firmware for this model anywhere.

This may be a candidate, depending on the version currently installed :

HWI-B120H-D/W | 2 MP WiFi IP Camera

Are you looking to buy HWI-B120H-D/W | 2 MP WiFi IP Camera at the best price? Visiotech, wholesale distributor of Hikvision.

www.visiotechsecurity.com

Or maybe one of these :

https://www.hikvisioneurope.com/eu/portal/?dir=portal/Technical%20Materials/00%20%20Network%20Camera/00%20%20Product%20Firmware/E4%20platform%281X21%2C1X31%29

 

[havran]

Hi, thank you for your reply.
I tried both FW but it didn't help.
Finally I found out that it is the E8 platform and downloaded this FW: IPCE_E8_EN_STD_5.7.21_231023.zip
and it works and the camera is alive again.