alastairstevenson
Staff member
Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English
- Thread starter whoslooking
- Start date
bonjour je suis nouveau sur ce forum et je rencontre un probleme mes camera hikvision bug elle font reset seul et automatiquememt il me semble qu il faut mettre le firware a jour mes ce sont des cam chinoises
pouvez vous me dire si c est possible de mettre a jour et comment faire surtout grand merci a vous
| Modèle | DS-2CD2035-I |
| N° série | DS-2CD2035-I20151110AACHxxxxxxxxx |
| V5.3.3 build 150803 |
| Version d'encodage | V7.1 build 150801 |
Aspiring Geek
Young grasshopper
Have tried the following on my bricked 2CD3132 which had lain dormant for three years in a box bound for tech refuse:
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
It worked. Alistair Stevenson’s fix, supported by others, is terrific. While the model number doesn’t match the model numbers precisely my 3132 is similar age and probably similar electronics. Just need to use the the 2132 codes when undertaking the mtd hack.
You can see my earlier contributions to this thread from April 2017 (page ~ 33) .
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
It worked. Alistair Stevenson’s fix, supported by others, is terrific. While the model number doesn’t match the model numbers precisely my 3132 is similar age and probably similar electronics. Just need to use the the 2132 codes when undertaking the mtd hack.
You can see my earlier contributions to this thread from April 2017 (page ~ 33) .
Some years later 
also many thanks to topicstarter - Downgrader tool with one click brought to life (or rather brought back online) my 2 chinese 2032 after repairing and upgrading old DS-7604NI-SE/P with EU firmware.
also many thanks to topicstarter - Downgrader tool with one click brought to life (or rather brought back online) my 2 chinese 2032 after repairing and upgrading old DS-7604NI-SE/P with EU firmware.
Rinat
n3wb
- Mar 15, 2017
- 9
- 0
Hello!
I have bought two cameras: one ot it hikvision DS-IPC-K34H-LT from China
V5.7.12 build 230614
V7.3 build 230510
The interface is on Chineese.
I could not connect it to IVMS-4200.
Is it possible to downgrade or upgrade a firmware to improve it?
I appreciate if somebody could resolve my problem?
I have bought two cameras: one ot it hikvision DS-IPC-K34H-LT from China
V5.7.12 build 230614
V7.3 build 230510
The interface is on Chineese.
I could not connect it to IVMS-4200.
Is it possible to downgrade or upgrade a firmware to improve it?
I appreciate if somebody could resolve my problem?
alastairstevenson
Staff member
As also responded to in your other identical post :
That firmware blocks any attempt to downgrade the version from that currently installed. Even if a downgrade was possible, it would not change the fact that the camera is stamped internally as a Chinese device.
That firmware blocks any attempt to downgrade the version from that currently installed. Even if a downgrade was possible, it would not change the fact that the camera is stamped internally as a Chinese device.