Search results

1st time trying to upload an image here so...... This PTZ has worked very well (over 3 years) until the building got a lightening strike. Took out this PTZ and the nvr. We installed a new nvr and when we plugged in this ptz all the cameras that werte up crashed. I have a test meter that can...

The machinist that works at this location gave us a hand creating a custom mount for this PTZ

The machinist that works at this location gave us a hand creating a custom mount for this PTZ. I hate mounting PTZ cameras.

One of the companies i work with installs the majority of the PTZ cameras I've helped install. I'm trying to talk him into intergrating a spotter camera. (i don't think we will) We only use 1 home position and it works great, but unless something enters the HOME positions field of view it...

We usually do a simple setup with 1 home position.. 360 sec of tracking before returning to home if it loses tracking. Intrusion as apposed to tripwire or smd. 300 sec. not 360. but it depends.....

I hate installing ptz cameras....with that said we just installed 3 - PDN5AI825H-GR ptz's Lot of ambiant lighting. Customers seem to like the tracking ability of the PTZ's and it seems to give one of the co. i do some work for an advantage over other co.s that dont offer ptz cameras. We've...

I thought the phone providers had 4g LTE band specific for alarm communicators that doesn't sundown until 2050. I didn't pay much attention to the specifics. just the 2050 sundown.....and i'm not an alm guy so may be way off. :idk:

Can they accept different cellular communicators? Alm.com great but some of the small companies i work with don't always use Alm.com.

I help a small company do alm wiring that has used the DSC legacy systems. The NEO is what they're starting to use. If all else fails call their tech support. My boss was on the phone with tech support on a NEO programming issue the other day. He said the tech support guy said he liked the NEO...

I had trouble with my ezviz db1c going offline and shutting down my doorbell chime. Everything just seemed dead. I even went so far as to order a new transformer to replace the old one in my attic. - never replaced it though. ...but then i turned off automatic updates and have not had the...

I feel your pain. I was good at system configuration years ago. I too have been frustrated at my knowledge or lack of it. I help install Dahua nvrs and the gui for LNPR's PTzs with auto tracking can be a real pain especially if your under the gun to set up everything the customer wants...and...

Just got my letter today. Sometimes i'm glad im a broke ass bitch with a 10 dollar truck. anyone with my info will be very dissapointed. one of these days i'm gonna figure out how to navigate "The Dark Web" may be better than pornhub.

I'm still a bit puzzled why the ip address would change on the cameras that are connected to the switch in the shop. You obviously have not added more cameras than your NVR is capable of processing. While 1 poe port on the back of the nvr is most likely 100mb, which is more than enough...

plug your tp link poe switch into a vacant router port. I'm gonna assume you did it this way because it was easier to run the cables like you have them, but each poe port on the back of the nvr is suposed to be for only 1 camera. You may have to run a cable from your router to the TPlink poe...

5 x of cameras are connected straight into the NVR, and other 3 are on a unmanaged TP link switch. TP switch gets connected to 1 of the POE ports back of the NVR. I've seen this work, but it's not the proper way.. Which cameras are changing ip adress? Would it be the ones going to the...

Haven't read anythig in this thread. As far as i know dahua only makes 2 or less NPR cameras. They usualy are 2mp varifocal cams. Big ass cameras. The GUI has all kinds of stuff but nothing you can't read up on.... and yes with the right NVR just a few settings need to be done and the plate...

at least your not too hung over. ;) Gotta meet up with a security guy at her house in about 1hr from now. Trying to get some coffee in me.

Gonna bookmark that for refrence.

T54IR-ZE was the one i had seen on here. Thanks Tony!

A link ro what i could search for would be great. AI via camera. The NVR she has may have 2 AI ports. (dahua / dahua oem) Thanks. - Kevin -Observant1

You purchased from a non rip off piece of shit....or (reputable person) I think most sellers should default the camera. If it will not reset to factory default he should not sell the camera without a disclaimer it may not reset and they do not know the password. If they refuse to help with...

Welcom to the SEC! .... Austin and their dildo rebellion...I remember....O well...it's America so sometimes the ones that drain money with no return get laid off.

Yep. It helps if yo u have a good test meter that can do TDR and other features. But yes Tony is correct. 7 wires will work most likely if you do it as he said at each end. It may be worth looking at if you can use mode A for power or you could even power it via 12VDC if that is possible. Ypu...

This may not be applicable to your situation. Some cameras/nvrs have corridor mode. I's especially good for hallways. Not gonna help with 10ft to 40 ft length fence, but in the proper location it's a great feature to try out.

Seems like a good deal. I got two good cameras out of 3 from a guy that posted somewhat regular...until he sold me the 3 cameras...now i don't see him post ny more. :idk:

I've got an 8 port LOREX. NR908N ...i tink it could be flashed/ upgraded ro a Dahua . I ned to spend more time on my BI computer. That's the ticket for me. ......and Roll Tide. We are in the Elite Eight ! ...final four! :p

Half my problem is getting my older laptop setup, (it's a great dell presision m50 serial cables galore) setting up in an area to do he work...then trying to do a step by step tftp ...puty is a thing of old days...it's just a pain for an old guy like me...

I remember the day one of our older specialists asked me a question that seemed so simple to me...he was a top level tech for many years.

==================================================== It helps if you can type. I can't. Maybe i could set up a meta key? or something with the characters necessary. Just thinking out loud. I can't hit the * key in time to slow rhings down and then try to type my command in. Yep i've had a...

They also make MOCA adapters that claim 1gig transmission ability with the 2.5 moca adapters. I have never used any but they are supposed to be plug and play.