Search results

So, I can confirm that when the camera is moving and then comes to a stop, it causes that wobble. This issue is not isolated to just returning to the home position unfortunately. and both EIS and OIS is on..

For me it’s just some solar work and main panel upgrade going on so scheduled work should be back up by evening at some point

It does both OIS and EIS but didn’t made any difference

At the moment have a power outage but once power is back on I’ll test that thank you

You are right that is a good test to perform I just did a quick zoom that seems like it happens when Camera moves zooming does not cause it but as soon if I even move the camera a little it does it..

Yes, I do have white LED street lamps, but they are not bright at all. They barely provide enough light to illuminate the area directly underneath them. also the video from last night with the lights off test. and i Don't know if you guys can tell but there is the shake when the PTZ comes...

Waiting for some vehicle to pass by, but here is a still shot.. Also the Lights which was causing the lens flare is off so there is less light now. And the settings

I will try to note the settings today. Sorry, I have done multiple restores to default in order to resolve the camera image shake. So far, the shake is still there. I will try to see what I can set for gain and shutter speed tonight.

Yes I will try to kill one of the lights tonight and post the video at some point tonight.

So I can tell you guys with confidence one thing: the night time performance is really good in terms of image quality and light sensitivity. Also 4/3 Cam video for comparison So far, here are my top two issues which I cannot resolve: There is some color banding issue going on where...

Correct only single line and it seems like 4 is the max rules I can have no matter how many different presets ... Unless there is a setting that I am not seeing.

Right now, what I am confused about is why it allows only 4 rules, regardless of how many presets there are. It seems that I can only set 4 rules. Additionally, it also seems like the rules are somehow linked to the presets.

Image seems ok and not tearing also I been using H264 Here are my settings..

I think the camera firmware may have a bug, or I am doing something completely wrong and missing something. I feel like... So under VCA --> Smart Event --> Line Crossing. When I start setting rules, it seems like you can have up to 4 rules for this, and you can only draw a line, which is fine...

The image tearing was not there but The camera still seems to have a shaky image when PTZ move at high speed , but I think that's because of the screw. If that doesn't resolve after getting that screw in, then I may have to investigate further. But I'll start with that and hopefully that...

As far as the tearing issue goes, I believe it might be related to the site or something else. I just checked the original BlueIris video, and the tearing isn't present, as you can see in these images from the same time frame.

That tearing on 4/3? Not sure. The bobbling is what I'm thinking, maybe that screw which was stripped at the arm may have caused it, but I'm not sure until I can try to get that fixed. If that doesn't resolve it, then I'm not sure what it is.

The auto-tracking feature seems to be a bit diffrent, and the presets keep defaulting to 1 instead of adjusting for Preset 3 so I can setup rules for auto Track,,. I have a feeling I might be doing something wrong, so there's definitely a learning curve involved. I'll try to get the hang of it...

Current Quick settings for night.. For HikVision. Current Setting For my 4./3

I am just found advance config on it..

Yeah, it seems like it holds onto the moving subject longer, but it's only been an hour. Definitely seems that way so far. No, that Corvette is a different one.

Finally got the PTZ camera set up with the help of a friend—it's heavy, LOL. I noticed that during powder coating, one of the screws on the mount got stripped or something not sure from what though, so I'll need to work on that to ensure it holds properly. Currently, it's not entirely stable...

So, I finally picked up the mount from the metal shop today. Essentially, I had them cut out the Hikvision mounting plate in the back and weld in a Dahua mounting plate to fit the PFA120. Additionally, I had it powder coated to match the camera's color. Now will try to get it mounted soon at...

Yeah, neighbors' rings usually don't even capture any details of vehicles or people at night. it reminds me of @wittaj's video he shared a while back (HA HA) to help enhance it...

Not on my system but on the other side neighbor has a ring cam or nest..I believe they have that piece of footage.

Yeah I have not even try it yet waiting for the mount.. If you upgrade one of your PTZ will you go with 2mp or 4mp ?

So, I just dropped off the HikVision mount at a Metal Fabrication shop to see if they can cut off the Dahua junction box and swap/weld it to the Hikvision to make the mounting process easier for me. The Hikvision mount is narrower and longer, However, I'm not getting my hopes up too high because...

Last night, someone stole a Corvette from our street. Did get the getaway vehicle on camera hours earlier while they seem to be scoping the area, and then they returned at night.

Or Also feels like Dahua PFB306W-S might fit and than PFA120 will be fine ?

I just got the camera over the weekend. First impression is it is really big :) and really well-built. I have not powered it up yet as it does NOT come with a mounting arm like Dahua, so I will order it and wait for it to arrive. Once that is here, then I will start testing and mounting it...